Jump to content
SAU Community

Recommended Posts

chasecam.com for a DVR solid state camera kit inc. bullet cam, alot cheaper than that well-overpriced Xrace cam kit.

yeah they're pretty much all the same as well..

could be a nice business to get into if people want to throw money away like that haha

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 months later...

Go_Pro_camera.jpg

I sell the GoPro Motorsport camera's here in Australia.

If anyone would like one, you can contact me at [email protected]

All of my camera's are sent Overnight Express so generally you'll have them the next day, unless outside of a metro area in which it will probably take an extra day. No waiting to receive the camera from the USA, if you receive it at all! Also, because it is bought here, you are covered by a 1 year replacement warranty! Gives you a bit of piece of mind should anything go wrong. We will also help you troubleshoot any problems, instead of ignoring you once you've paid your money!

If you'd like more info or a spec sheet, feel free to email us.

For the money, you won't find a better system!

Have a look at a sample video, mounted on the front spoiler of a Porsche 928:

And another:

And another:

He's made some awesome video's!

so that thing is suction based im assuming???

Hey Andrew,

It comes with a suction cup mount for mounting on the inside and outside of windscreens and windows, body panels, motorbike fairings, surf boards snow boards and wakeboards, pretty much anything that is relatively flat and smooth. By the way, they are water proof to 30 metres so can be used in the rain, snow or surf!

Also included in the pack are 4 adhesive backed quick release clips you can stick on body panels for a more permanent mounting position that you often use, on your helmet, the limit really is your imagination! We're about to use these in Marine Biology to study sharks. There really is no limit to what you could use them for!

So to answer your question, yes, you can use the suction cup. We have tested them at up to 292km/h on the roof of a 996 GT2 at Drive Bathurst '07 multiple times over the week and had no problem. They have also been tested on the *OUTSIDE* of a plane at 150mph without drama.

Feel free to contact us at [email protected] for more info or to purchase them.

Luke

(Race Supplies Sydney)

There's alot of suppliers for the GoPro HERO cameras now. There are a couple of places you can buy from in Melbourne.

http://www.vsport.com.au is one place, and also meridian motorsport http://www.mmsport.com.au. I've noticed all the places sell them for $259 without a SD card. You can buy 2Gb SD cards for $15 from PC hardware shops like MSY.

is that $260 for the mount, or with a camera?

Check the attached picture for what is included in the price. There are the 3M adhesive backed quick release clips (for helmets and body panels, etc), suction cup mount, RCA/USB cable for transferring the footage to your laptop/PC/TV/VCR, various plastic arms to allow mounting on any angle, the waterproof case and the camera.

So it's a complete camera and mounting kit, not just a mount. Camera is under a 1 year warranty from date of purchase in case anything should go wrong, but i am yet to have any problems.

I also sell a "Get Started" package which includes the Camera with mounting kit, 2GB SD Card, 2 x AAA rechargeable batteries (as well as 2 x AA rechargeable batteries as an extra), a battery charger and freight for $320. Everything needed to pull it out of the box and use it. Customers can elect to have the batteries pre-charged or not. Some people just want a solution and don't want to have to find individual pieces, so that is why i offer it. I take a few dozen packages out to the track with me when i sell them so that people can purchase them and use them straight away!

Dezz, if you'd like a spec sheet, send me through an email and i'll attach one for you.

post-29416-1211969123_thumb.jpg

All i have is a bit of threadbar through my parcel shelf, a piece of 6mm x 25mm aluminium plate bolted near the top, screw my cyber shot 3.2 on it, lock with nuts, and put zip ties through the plate and around the camera so if the thread breaks out of the camera its still secure. Its all very secure and stable, cant come flying off. Its no DVD quality but its easily watchable.

This sound like it may pass cams scrutineering?...has only been through a Winton funday...

  • 2 months later...

I have just got a Hero camera and will be using it for the first time at Sandown on the 31st of August.

My only issue with them so far is that there is a bit of play in the mounting when it slides into the quick release base. I'm trying it tomorrow to see how much it impacts the footage with vibration, however a little bit of rubber packing should fix that.

Apart from that, it's a great bit of kit.

Regards

Andrew

Wish I'd seen this thread a month ago. I bought a panavise sucker mount which works well, accept for the rake of the front screen is such that the camera (and it's a small one) won't sit upright. It can only be mounted portrait style.....Cost $100 too. Bugger.......

Wish I'd seen this thread a month ago. I bought a panavise sucker mount which works well, accept for the rake of the front screen is such that the camera (and it's a small one) won't sit upright. It can only be mounted portrait style.....Cost $100 too. Bugger.......

Hey,

If you get sick of that, feel free to contact us at [email protected] and we can go from there!

Edited by Lukus
  • 2 months later...

Just bought a new mount setup from Videocraft (videocraft.com.au). It consists of a clamp and double ball pivot system, both made by Manfrotto.

It mounts to my roll cage, either on the diagonal bar or side upright. Top quality gear & exactly what I wanted.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...