Jump to content
SAU Community

Recommended Posts

  • Replies 96
  • Created
  • Last Reply

Top Posters In This Topic

Originally posted by Silver-Arrowz

Yeah, If I give it to you on CD it would be best. That way you can re-size and clean up the pictures as you want.

Respect for the IT illiterate !:P

Sounds great! Let me know when done and I can pick up or organise something anyways. Thanks.

It was a GTS-T with, believe it or not, a pretty full house RB26 in it. Has a claimed 450 kw at the treads.

Put down a 50 sec lap time which was'nt bad considering the GT3 made the record lap time of the day with 47 sec. That thing (GT3) was awsome. I wan't one.

Weather was perfect. Awesome GTR's even though not heaps.

Joe from SSS Auto 3 litre bottom end BIG to mount turbo's 450kw at wheels. Geoff also from SSS Automotive Gibson powered R32 GTR, R33 Growls monster, GTR8U R32 GTR which we just sold with big single turbo etc 300kw at wheels with sequential box fastest GTR of the day 48.7 Porsche was faster but Warren Luff was driving we later realised.

Street Machines came down from Brissy with their RB26 with twin Apexi turbo's and 360 kw at wheels, big brakes etc A zed just beat it though.

Pos Car Driver Entrant Vehicle Cap CL Qualify...Lap Gap

1 10 Bruce Jones Porsche GT3 1 S2 0:47.5410*

2 37 Gary Burchett GTR R32 1 S2 0:48.7290 0:01.1880

3 27 Geoff Fear 32GTR 1 S1 0:49.1840 0:01.6430

4 19 Glenn Martin EVO VI RS 3 S1 0:49.7760 0:02.2350

5 36 Warren Luff 300ZX 2 S1 0:50.1320 0:02.5910

6 38 Joe Evans GTR 1 S2 0:50.1790 0:02.6380

7 1 John Penlington 300ZX 2 S1 0:50.2770 0:02.7360

8 32 Jason Appleton Skyline R33 1 S1 0:50.4750 0:02.9340

9 20 Nathan Lee Mazda RX7 2 S2 0:51.2170 0:03.6760

10 12 David Baxter MR2 3 S1 0:51.2270 0:03.6860

11 7 Gerard Manion Silvia S15 Jap Spec 3 S1 0:51.5220 0:03.9810

12 33 Stephen Struyk R33 GTR 1 S2 0:52.2880 0:04.7470

13 11 Gary Baxter MR2 3 S1 0:52.3480 0:04.8070

14 29 Norm Campbell R32 GTR 1 S2 0:53.1030 0:05.5620

15 5 Len Evans R32 GTR 1 S2 0:53.1910 0:05.6500

16 35 Duncan Handley GTST Skyline 1 S1 0:53.2180 0:05.6770

17 23 Sam Franco 300ZX 2 S1 0:54.0860 0:06.5450

18 31 Mark Croudace BMW 3 S1 0:55.0930 0:07.5520

19 16 Andrew Stewart 200SX S14 3 S1 0:55.2940 0:07.7530

20 21 Gordon Camilleri MR2 3 S2 0:55.5860 0:08.0450

21 22 Jordan Szoko 180 SX 3 S1 0:55.9920 0:08.4510

22 4 Anthony Bilie Silvia S13 3 S2 0:56.1800 0:08.6390

23 2 Chris Manning 180 SX 3 S2 0:56.5410 0:09.0000

24 13 Andrew McIntosh MR2 2 S1 0:56.8960 0:09.3550

25 17 Alex Manol 300ZX 2 S2 0:57.0970 0:09.5560

26 30 Craig Spiteri Toyota Sprinter 1 S1 0:58.1910 0:10.6500

27 3 Graeme Manning 180 SX 3 S2 0:58.5340 0:10.9930

28 18 James Crisp Silvia S12 3 S2 0:58.9480 0:11.4070

29 34 Glen Hunter R31 Skyline 1 S1 0:59.9840 0:12.4430

30 24 Kristian Han**** 3000 GT Supra 2 S1 0:59.9950 0:12.4540

Fastest Lap Av.Speed Is 148kph

R=under lap record by greatest margin, r=under lap record, *=fastest lap time

________________________________________________________________________________

________________________________________________

Issue# 1 - Printed Sun Aug 3 15:37:14 2003 Timing System By NATSOFT (03)63342353 www.natsoft.com.au/results

Lisa Drayton - Eldee Timing Solutions: Ph- 0402 830 313

or http://www.natsoft.com.au/cgi-bin/results..../2003.ORAN.S2.Y

Originally posted by broken

whats the go with that blue street machines r33?  

was it a gtr? , i never saw it up close, it sounded like it had a old 202 in it.

Hehehe :D

Thanks for the great day Boosted Zed. Being my first time at a track you guys made it easy!

Your zed rocked btw :mad:

Cant wait for the next one, and hopefully Ill have brakes and decent suspension by then :bahaha:

P.S Im James Crisp the guy driving the S12




  • Similar Content

  • Latest Posts

    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
×
×
  • Create New...