Jump to content
SAU Community

Recommended Posts

Different cars, different tyres and need to be driven differently. So i dont think you can say Mark is giving away much behind the wheel jsut from looking at that vid

It just looked like he was using a little less of the track is all.

  • Replies 1.9k
  • Created
  • Last Reply

Top Posters In This Topic

Marks laps in the video looked very clean indeed!... I would say that comparing the S2000 v the GTR lap, the GTR was the one that had less drama about it... throttle application was smooth, and tended to be only 1 go at it...

what was the lap time difference between the 32 v 35 and say the S2000???

JB's driving style certainly is exciting to watch!!! butI'm not so sure on it bringing the fastest lap time.

LOL as ROY said williamsf1, you could not even compare the two driving styles in two very very different cars. Believe me, I was trying to drive to S2000 smooth. Ummmmmm 450HP atw, RWD, road tyres vs anything AWD is going to look................lets say different. I think Mark is doing a super job in the R32 vid :P

The S2000 is on street tyres, so to get the best out of something with no grip will always mean its going to be a little greasy through the corners as it is wrestled through

Don't forget rwd vs 4wd as well

edit, looks like boz beat me to it....

Edited by BHDave

JB sorry if you took that as having a go, far from it.... Just an observation comparing both videos, thats all.

Paul Kemal tells me you should have been in an ARC this year? that would have been good to see!!!

The S2000 looks quiet neutral on turn in, but even before you make for the throttle, it has a big dose of oversteer mid-corner.... is this all tyre related? or might it do with a softer rear bar? (presuming you will drive it again??)

Sometimes it is hard to understand the way some people write things on forums and sms. I did not take it the wrong way at all Ben, all good mate.

Ah yes Pablo lol I have been wanting to get into the series for a while. Had the deal done with a V8 team (the aussie car was going to be the same colours as the V8 supercar etc) and then all of a sudden the budget was put into the V8 :P

The tyres on the S2000 make a huge difference. I suppose it would be nice to take it out and have a play with the suspension to see if we could improve it. This car was really just put together as a toy and has never been tuned for the track until now.

The main thing we have been playing with is the turbo and boost, just to try and make it a bit more driveable :P

i think we need to talk, the fact that you are doing brake upgrades is scaring me when you would usually be looking for a chute lever.....are you a bit confused pauly? let me know about those Brembos. After seeing some of these vids, ive got a feeling the standard brakes with pad upgrade will not cut it....keen to get the chevy out amongst it.

Just bought some ex DJR AP 6 spots with 4 sets of 375mm rotors....nice.

standard brembos with race pads are all we are allowed to run on the production car. they are holding up OK with the power we make, but the GTRs doing superlap are making at least 150kw more than my car.

I would be chasing a catch can first before brakes my be djr has a dry sump tank you could convert to a catch can 10 litre should do the job lol :O

The engine was breathing more than a litre a lap...even on the out lap!....sump is a 10 litre jobbie so we may get 2 hot laps before we have to pit and empty then fill up...lol.

Catch tank is sorted...same style we run on twoogle...and baffling the rocker covers the same also.

The engine was breathing more than a litre a lap...even on the out lap!....sump is a 10 litre jobbie so we may get 2 hot laps before we have to pit and empty then fill up...lol.

Catch tank is sorted...same style we run on twoogle...and baffling the rocker covers the same also.

This will not fix the problem on a track car only good on a drag car where you are only flat out for 10 seconds not for ten mins if you need a hand with the set up give me a call :O

Hi Boz you did a great job driving the 2000 looked tops coming onto the straight ,when you got the win and people started to bag you out you should have given them the Jim Richards talk "YOU S ARE A PACK OF ARSE HOLES"everyone has the same chance to practice at the track like Boz and he is a very helpful guy that would be more then happy to teach you how to get around the track quicker to improve your pb keep up the good work Boz but look out next round lol

Guest
This topic is now closed to further replies.



  • Latest Posts

    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
×
×
  • Create New...