Jump to content
SAU Community

Recommended Posts

  • Replies 745
  • Created
  • Last Reply

Top Posters In This Topic

Think we're going down to the drags for a look, I won't be racing unless money starts to grow on trees and i can fix my car up within a few weeks. Doubt my gearbox will ready by then either. not sure when the black beast will be ready but i don't think that soon, its coming together quicker now though. Until i get my new car I'm staying out of racing for a bit.

Originally posted by fwddriftking

ouch that suck you haven't though about contacting jms at all willo?

I've been keeping an eye on their site but haven't seen any pull type clutches go through. I would assume they can find whatever I want but a lot of other places probably can as well. At this stage I'm thinking about waiting and getting something new, a lot less hassle.

Autobarn. They have a pile of them in the cabinet. I was a pretty technical proceedure but I'll outline the basics for all those wishing to purchase said product.

1) Go into Autobarn.

2) Speak to closest Autobarn employee and say "High Octane 4"

3) Take DVD back to counter.

4) Pay for DVD (or not but I didn't feel like running and I'd like to go back there)

5) Leave.

Any Questions?

Originally posted by digsy_20

actually I am bulk impressed with the Scibyline... It goes hard... He called me from the lap and within a couple of minutes he was at the top of the Mount...

She does what she's told. :/

Here's a photo I took from three weeks ago.

skyline1.jpg

Correct me if I'm wrong (which I probably am) but don't Daikin make some awesome clutches? Although I think they're european.

THere was plenty of High Octane 4 DVD's in Autobarn today about 20 minutes after Squizz was in there too.

Oh and the dude thats been canning Dev's old 33 is in fact Briscoe's sun he's been driving it home every after noon of late. and gods it's sad when he pulls up preparing to drive up his driveway only to sit there chrunching and searching for gears for a few minutes.

I think I saw Fro pulled over last night. Did he get of alright? Or was it major defect time? I hope not. See everyone around.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
×
×
  • Create New...