Jump to content
SAU Community

Recommended Posts

Hi guys

Not sure if this trend have been posted before and probaly a stupid questions.

But I just want to know what fuel you guys usually use with the Skyline and have you notice any differences in milage, power, idle etc.???

I have always pumped Shell Optimax as I though they have the highest octane and some cleaning agents in it. But I just found out in some other treds that some people also use BP Ultimate and Mobile fuel.

If it is the case I'm more happy to change to BP as it is right next to my place and is cheaper than Optimax.

Cheers

if you're ever anywhere near a place that sells evolution 98, try it out. i get measurably lower knock values on the pfc when compared to mobil and bp stuff. optiomax was worst of the bunch for me.

Adrian

Guest RedLineGTR
Originally posted by CerealKiller

yeah this has been questioned many a time before.

Optimax has reduced in quality the RON rating is variable servo to servo. The most consistant seems to be BP Ultimate and Mobil Syngery 8000 which are both 98RON.

sounds about right bro..

Guest RedLineGTR

Basically i would recommend to type other fuels at least once. Some cars run better on certain types and some dont but Optimax is rated at a max of 98ron when brands like BP ultimate are rated at 98ron or more but in most cases they arnt much more than 98ron+. Alot of people have at alot of bad batches of optimax etc. My 2 cents.

Thanks for the feedback guys.

I think i will make a switch to BP Ultimate. But doesn't all BP as Ultimate now instead of Premium Unleaded?? I'm only guessing because the Ultimate would replace the P.Unleaded, like Optimax replaced their P.Unleaded.

Cheers

I know this may upset some people but in my experience, I tried

Shell Optimax and it was the worse thing I could have done.

Quality changed from servo to servo, and in fact the car lost power. I am not sure if it is related but my Oxy sensor went bust and had to replace it. Read some guys had problems with Optimax and blew their Oxy sensors as well. Like I said, I am not sure it is related to Optimax. I swicthed to Ultimate and car runs smoother and stable fuel economy. I haven't tried anything else.

very intresting comments....i have been wondering for a long time what the superior fuel is....i have been using optimax since i bought the skyline, almost 2 years, not really had any had problems, however after reading the above comments i am eager to experiment with BP and perhaps Mobil.

its all the same LOL ... just try most of them out ... u will find that different cars will react differently to the petrol depending on the way its tuned ... i've tried lots of petrol in my car ... just about all i can think of .. even normal unleaded for half a tank to see how i went ... needless to say ... not good in terms of mileage and power ... the best for me is regular pulp .. bp that is ... probably the cleanest is bp out of all the brands from what i know ... low sulfer or whatever their advertising is ... but yeah i use that cause its 5cents cheaper and gives me more economy ... beats me why?? hehe .. i want to know how these engines will react to all this ethanol the government is trying to support for the poor sugar growing farmers ...

Prediction:Federal Government legislates that all regular fuel must have a small % of ethanol. Premium Fuels exempt , HOWEVER a new levy (read TAX) to be introduced to "offset negative revenue stream". (Because they know there will be little effective opposition. The fuel companies will go along with it and the media couldn't give a stuff)

[/cynicism]....:D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...