Jump to content
SAU Community

Recommended Posts

I'm upgrading my Gtt brakes soon for motorsport use and from what I've heard and read and heard I might be better of buying after market calipers (to use with 324 diameter calipers) rather than buying r33 or r34 GTR Brembos .Are Brembos overated ? Any thoughts on which way to go. obviously you only get what you pay for but I'm just talking pure performance of different brands of calipers that can be bought at reaonable prices.

Edited by PJF

For the money the Brembos are a tad overated. But it takes a bit more money for something like CSC/B-Spec to get much of an improvement.

What mods do you have, What tyres are you running, What wheel diameter are you running? You will be pleasantly surprised what some good fluid and something like Endless CCX pads will do to your brakign system. Throw some braided lines in there to get a good baseline and i would be surprised if you dont have enough brakes.

What sort of motorsport do you have in mind...what tracks?

I wouldn't bother swapping calipers.

get your lines swapped for braided, get some good pads and run a decent brake fluid like motul rbf600 or the equivalent high temp penrite. Then run it until your rotors need changing and replace them with a quality 2 piece unit (i'd suggest project mu HCR pro based on my limited experience) or alternatively, if you feel the brakes still aren't up to scratch at that stage,then get the bigger rotors and new calipers

damn, beat me to it roy!

Edited by BHDave
For the money the Brembos are a tad overated. But it takes a bit more money for something like CSC/B-Spec to get much of an improvement.

What mods do you have, What tyres are you running, What wheel diameter are you running? You will be pleasantly surprised what some good fluid and something like Endless CCX pads will do to your brakign system. Throw some braided lines in there to get a good baseline and i would be surprised if you dont have enough brakes.

What sort of motorsport do you have in mind...what tracks?

Semi slicks, standard diam. wheels. Will be running in targa tassie 2009 hence the need for good braking system

i ran the g4 brakes at targa last year, they are 8 spot over 330mm calipers and fit well under 17" wheels. if you are running 18" you have more options but 17 is limited to about 330mm discs for most wheel designs.

i ran the g4 brakes at targa last year, they are 8 spot over 330mm calipers and fit well under 17" wheels. if you are running 18" you have more options but 17 is limited to about 330mm discs for most wheel designs.

Thanks for your reply Could you PM me if you have any extra info on the G4's. I to am running in Targa again next year. Any info would be appreciated .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...