Jump to content
SAU Community

Recommended Posts

I would have thought the tape prevents the broken peices of glass falling all over the place in an accident...

Touche`

if i even spelt that right. haha. only reason i was thinking was to minimize sun glare off the head lights. either for the driver infront or driver themselves... i now highly doubt that. haha

It is also used to distinguish cars from other similar cars when they are running down the straight and you have to put out the time board and you show it to the wrong one without tape on the headlights... man, I must have done that like 4 laps in a row til someone told me :blink:

I thought it was just to hold the glass together a bit better. Don't really understand for plastic though, but a suppose the same can apply.

When drifting, there is a lot of stress on the car, so I figured this provides a little rigidity for the lights to avoid them cracking. Might be totally wrong, but thats what I've assumed :blink:

Actually the precise intersection of crossing tape on a headlight gives the car a much needed boost in aerodynamic instability. Which results in more ability to get the car sideways.

+1

sounds like the most reasonable explanation

Yeah dude i learnt from driving country roads to and from pinjarra. helps stop shockwave and has saved a few windows id say. doesnt stop it chipping the window though :D

Gotta be careful with that though.. Heard some horror stories about shattering all the bones in your hand doing that..

Nothing can help you Rhys.

Cheers Steve, appreciate it mate.

stops the lights shattering if they cop a rock or something off the track, same as when u pass a car on a country road you touch the windscreen. Absorbs the impact and helps lessen the damage.

:)

They did this on MythBusters. Putting your hand on the window has no affect what-so-ever!! Your window won't break, its reinforced or whatever it is. All cars are from a certain year. Cant remember what year though, but fairly old.

Cheers Steve, appreciate it mate.

They did this on MythBusters. Putting your hand on the window has no affect what-so-ever!! Your window won't break, its reinforced or whatever it is. All cars are from a certain year. Cant remember what year though, but fairly old.

damn bat me to it :blink:

as said, mythbusters, been there done that, negative on the impact absorption

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...