Jump to content
SAU Community

Recommended Posts

Good afternoon,

Well I have done a search and not totally satisfied with the info i have recieved on peoples experience with the 25-40 as alot of it is related to people running it on the RB20's or on RB25's with half the supporting mods, so thought id start my own thread about peoples experience running this turbo with all supporting mods.

My motor is being rebuilt with forgies, gtr rods etc, 720cc injectors, pump, cooler, exhaust and the rest..

Will this turbo be laggy with a decent setup?? I will be running standard cams/heads with a microtech ecu.

Ive read through threads that this turbo is a little laggy but its mainly from people who arnt running all supporting mods or using the turbo on an RB20..

Im hoping for atleast 240rwkws and decent boost coming in from 3000rpm and onwards...

Any input on ur experience with this turbo on a well setup RB25 would be excellent.

Thanks

Edited by Dean_HR31
Link to comment
https://www.sau.com.au/forums/topic/214831-bought-a-hks-25-40-for-my-r33/
Share on other sites

Its the worst turbo of the ball bearing brigade.

It makes a tad more peak power 2530, but with a much poorer midrange... so lag vs gain its not worth it.

Moral - the 2530 is the choice, then say a 2835 or similar, just skip the 2540 altogether, old design

The 28-35 turbo was out of the question as i want a turbo that looks standard. Do not want to replace turbo in the case of an EPA.

And I couldnt find a second hand 25-30 for sale... Do they also look standard in size like the 25-40??

Edited by Dean_HR31
The 28-35 turbo was out of the question as i want a turbo that looks standard. Do not want to replace turbo in the case of an EPA.

And I couldnt find a second hand 25-30 for sale... Do they also look standard in size like the 25-40??

2530's are the same, its the comp wheel thats different (and too big)

GCG hi-flow is what you should have purchased, perfect turbo for 250rwkw :thumbsup:

Or even a GT-RS or one of the other good options on the market

Obviously though a GCG hi glow wont be of the same quality of a HKS turbo!??

I want something reliable as my engine is costing me alot of money...

Ive heard nothing but excelent reliability from HKS turbos...

Can i just have someone confirm that the HKS 2530, 2535 & 2540 all look the same - stock size turbo looking..?

I am planning to put the heat shield back on with this turbo....

Thanks

Edited by Dean_HR31

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...