Jump to content
SAU Community

Recommended Posts

Originally posted by haste

Does anyone know where to get a road worthy, even though the car has a relatively sizeable top mount turbo? Need to get the car registered.

i just got my car rw and rego'd with top mount but then a mate went to same rw place a week later and they wont do it. still hasnt found anyone to do it. its all luck.

RW testers are liable in court if you or someone else is hurt ,or in any accident if the car is found to be un road worthy. Accident insurance apraisers do check.  

It is more difficult now

Thing is though, you took the vehicle there, they tested it.. a week later 50 mods are back on after you left it with your "brother" there isn't much they can do.

Anyway, with the big top-mount turbo thing, you should be able to get it engineered for under $1000, then its fully roadworthy and can be registered that way. Probably the best way to go about it. It is possible to be fully legal you know, it just takes a bit of $

Get it done properly. (Eng cert, etc)

Think about, if you can get a RWC for a car that obviously isn't, then what does that say about RWC when you go sell/buy a car?

If there is one standard that EVERYONE sticks to, then everyone knows what a RWC means. Otherwise, you might as well sell your car with the 7 of clubs cuz that is as bout as meaningless as a RWC.

i spoke to an engineer about getting my car engineered so that its all legit. he told me that you cant get a car engineered that has been modified that is newer than the 80's (?) and he said that the only way to do it was to get it checked by the epa which cost 4k. dont know if this is ture though.

No, its not actually true.. but some places probably are either unfamiliar with how to do it, or can't be bothered.

Getting it certified for EPA pollution regs is again a different matter..and yup, i think its a few $k because it has to go through a full involved process

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...