Jump to content
SAU Community

Who Is Watching Scrapyard Challenge?

Duncan

By Duncan,
in Fabrication

 Share

Recommended Posts

Duncan Grand Master

Duncan

Posted
Posted

This show is a classic. 2 teams get 10 hours and a scrapyard to build something for a challenge.

tonight's example was they had to create a vehicle that could turn into a bowling ball. the guys that chopped up the fiat and built 10" high wheels by cutting hundreds of slits into some box section and welding them up again in a circle.

then there was the day they had to hurl cars on the ice.

or the submarines

or the walking cars

or the dune buggies

or the hovercraft

or the formula race cars

etc etc

its great to watch the engineering challenges, creative solutions, and how quickly they have to resolve them

Link to comment
https://www.sau.com.au/forums/topic/216521-who-is-watching-scrapyard-challenge/
Share on other sites
VB- Veteran

VB-

Posted
Posted

i used to watch in on foxtel, bloody awesome show, love seeing what they can build out of basically nothing except scrap steel, some amazing engineering that goes n when you really look at what they achieve

GTRgeoff Grand Master

GTRgeoff

Posted
Posted

I've watched a few times Duncan. Not been overly impressed, but then they do usually choose contestants for these kinds of shows for entertainment instead of capability. Just hasn't really caught my interest mate. Maybe it's the Poms :(

Duncan Grand Master

Duncan

Posted
  • Author
Posted

yeah and to get enough momentum to roll in the first place. good solution from the guys mounting a weight at 2o clock. the girls really didnt think it through - it just skidded along on the wheels instead of turning :blush:

W0rp3D Grand Master

W0rp3D

Posted
Posted

have you noticed how in some episodes they need things that are somewhat specific to what they are building (not something you would normaly find in a wreckers) but they find then nicely placed on top of a pile of rubbish?

Duncan Grand Master

Duncan

Posted
  • Author
Posted

damn straight - very suspicious. In particular the big blue boat that turned up this week when they had to build a rowing machine. And how often useful motorbikes and properly running car engines turn up.

but I'm OK if they do cheat with that - its the creative stuff that I like. In the rowing machines for instance 2 totally different solutions to the same problem (although one owkred heaps better than the other)

paulr33 Grand Master

paulr33

Posted
Posted

yeah i watch it

and downloaded the episodes from your local bit torrent source

it used to be junkyard wars when it was on foxtel in australia

its a great show - heaps of fun and some good hack jobs to solve wierd mechanical problems

W0rp3D Grand Master

W0rp3D

Posted
Posted
tonight was a "best of" show....on a friday.....I suspect we have seen the last episode for a long time :thumbsup:

mother f**kers

although i have downloaded the first 2 seasons.

running out of things to download, need new shows

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • drifter17a
      R34 gtt rb25det neo timing belt kit

      By drifter17a · Posted

      So now doing the change and first time dealing with rb so little nervous giving engine power and potential for screwing it up When you align all marks and then remove crank bolt, timing move little I assume you can put the bolt back in once you have removed the pully to get timing to where you want?   here is pic of my both intake and exchust cam aligned, depending on angle you look they seem to be either aligned or a half tooth or so out. Any thoughts? Should you angle your face and look at each mark that way as if looking straight rather than from above as it can be misleading   <a href="https://ibb.co/ZpnhcvbF"><img src="https://i.ibb.co/HfWrGR9b/IMG-4447.jpg" alt="IMG-4447" border="0"></a> <a href="https://ibb.co/4wm2wn4q"><img src="https://i.ibb.co/JWBqWwr1/IMG-4445.jpg" alt="IMG-4445" border="0"></a>   https://ibb.co/ZpnhcvbF https://ibb.co/4wm2wn4q
    • sunsetR33
      braided lines for the turbos

      By sunsetR33 · Posted

      Thanks for the reply @GTSBoy Haven't really thought of that yet, but you are right. If the hose was damaged it should be absolutely pissing by now. I'll put some heat sleeve around it for good measure since I'm already removing the line anyway.  Maybe I'll put on some of the stock hardlines if I ever fully remove the turbos again. Maybe when T51R modding the compressor housings? Might be a fun mod on GT28s for that "fake single turbo" effect.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 1: I did some work on the car already before finalizing this post and my "issues" list. I dropped the Tomei exhaust in favor of the HKS Hi Power Silent. Sounds nice and I can actually hear myself think now. Also gives me a realistic chance to legally drive without silencer inserts. A bit of cheating was necessary to still be able to mount the Top Secret style diffuser. Some malusage of washers and a bit of "convincing" toward the brackets and exhaust hanger seemed to do the trick. The shaky steering wheel has been resolved as various suspension components were worn, like sway bar bushings and link bars. Most notably the two steering tie rod ends. Had some trouble finding bushings because my sway bars are not OEM thickness, 23.x up front and 27 rear. But non adjustable, so no aftermarket I suppose. Maybe they are nismo units? Turbo oil drain hoses were definitely still the originals and are new now. Wasn't the cause of the turbo oil leak sadly. Currently removing the rear turbo because of it, I suspect the braided oil feed line is the culprit. This issue needs to be dealt with so I can work towards actually getting the turbo setup legal and inspected. Two new issues to add to the list as well. Rear Main seal is probably leaking. Time will show how bad it is, I don't really want to drop the gearbox right now just for the stupid seal. Could fix a few other things in one go once I do that. Front right driveshaft grease is going past the cv boot, so at some point I'll fix that too.
    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Ok so no 4cyl clutch... Yeah it is a factory manual. So if iam correct i need clutch and flywheel too? I can use something that suits something like R32 GTST?   EDIT: https://www.ebay.com/itm/224291042776 Is this ok?   EDIT2: i maybe forget to mention this(dk how important it is) but the trans will be behind RB25DET NEO(iam doing swap) It will be there for a little while. Iam planing to do bigbox or BMW tranny..
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      You're probably right about that one. Thanks for your suggestions, I hope I don't need a new 3rd brake light. Although wiring issues might arguably be worse. Right now I'm in the midst of a turbo removal because of my oil leak, other problems are going to have to wait for now.
×
×
  • Create New...