Jump to content
SAU Community

Recommended Posts

Item: 18x9 +20 Gold BBS LM Wheels

Age: Unknown

Condition: Excellent

Price: $2900

To Fit: R32 GTR

Location: Sydney, NSW

Contact: PM or email (andrewho at au.ibm.com)

Comments:

Beautiful wheels, only selling because I need more brake clearance for my big brake kit.

A few scratches along the polished lips, but as they are 3-piece wheels, very easy to dismantle them, and get them polished up and looking perfect! I have attached photos of each individual wheel, and tyre depth.

Over $5000 RRP for these expensive and heavily sought after wheels.

BBS_side.jpg

BBS_rear.jpg

BBS_offset1.jpg

Link to comment
https://www.sau.com.au/forums/topic/216859-18-bbs-lm-wheels-for-gtr/
Share on other sites

would you post?

I can arrange a courier to your door for around $200, but obviously I'd prefer a local sale because I'm a lazy bugger :down:

will these clear R33 gtr brakes

Shouldn't be a problem at all, but you'll have to confirm elsewhere.

These are 18x9 +20 offset.

:D

I can arrange a courier to your door for around $200, but obviously I'd prefer a local sale because I'm a lazy bugger :down:

Shouldn't be a problem at all, but you'll have to confirm elsewhere.

These are 18x9 +20 offset.

:D

Just to clarify archie01 on these forums has the exact same rims in the exact size/width and offset, and runs the Alcon 6 pot 365mm rotor combo on the fronts, so standard Brembos are not a problem. PM him to confirm.

Hope that helps.

Just to clarify archie01 on these forums has the exact same rims in the exact size/width and offset, and runs the Alcon 6 pot 365mm rotor combo on the fronts, so standard Brembos are not a problem. PM him to confirm.

Hope that helps.

Thanks Jack!

Beers on me during Superlap! :down:

  • 1 month later...
  • 1 month later...
  • 1 month later...

Okay... Back in Australia *AGAIN*... :P

These need to go... Please all those who called, please PM me again or leave a message on my mobile. I WILL return your calls!

Cheers,

Andrew.

0418 881 113

  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...