Jump to content
SAU Community

Recommended Posts

Just had my exhaust completed by adding 3" dump and front pipes to the existing 3" hi-flow cat and 3" cat-back system.

Problem now is that the acceleration *feels* lazy, especially 2nd gear. Even the dodgy stock boost gauge is peaking a bit lower than what it was. Granted, I haven't got any actual data to show for a loss in power, but its a feeling that I'm getting which is enough for me. :D

Its not a flat-patch at a certain rev-range, it simply feels that the car is slower all the way through.

Anyone else had this sort of experience?

On the plus side, I can hear the turbo spooling up more now, which I like but that doesn't make up for when I'm getting smaller in someone else's rear-view mirror.

Link to comment
https://www.sau.com.au/forums/topic/217298-is-this-common/
Share on other sites

I don't have a boost controller so I can only assume I'm running stock boost. That being said, the stock gauge reckons its running at about 9psi (needle *was* right on that middle mark between 0 and +7, now its just under it).

I wondered if the ECU wasn't used to the breathing space but I haven't done anything about that (no piggybacker or reset or anything logical) and I'm pretty certain the O2 sensor is ok. It will be old, but ok and I'm basing that on the fact that the car was doing well before the new pipes were put it. Although, I'm now wondering if the mechanic perhaps had a go at cleaning the o2 sensor. Would that have an affect on the ECU at first, particularly if it was really grubby before?

Link to comment
https://www.sau.com.au/forums/topic/217298-is-this-common/#findComment-3836673
Share on other sites

I put FMIC, Pod, Full exhaust and my car went worse than before the mods. once I got my turbo Hiflowed and tuned to suit all the mods...Its a Rocket.

Stock ECU is good for the STOCK setup once you change something the tune needs to change with it. do all the mods you wanna do then get a ECU of somesort either stand alone or piggyback and get it tuned properly.

My car has gone from using 13.5 Litres per 100 to 8.8 Lph, not to mention bucket loads more power on the loud pedal.

and still makes full boost by 3000rpm.

Dave

Link to comment
https://www.sau.com.au/forums/topic/217298-is-this-common/#findComment-3836741
Share on other sites

I was hoping to get an ECU remap with Dr Drift once I got my boost controller and FMIC installed. Unfortunately I probably won't be able to get the FMIC put in for a while.

What would people recommend so far as an interim tuning goes? Is it worth it, or even possible (without any PFC/SAFC etc), to get some sort of tuning done prior to the FMIC?

Maybe I should resolve myself to biting either one of those bullets: "zero-power" or "empty-wallet" until a proper ECU solution is found.

Link to comment
https://www.sau.com.au/forums/topic/217298-is-this-common/#findComment-3836855
Share on other sites

If the computer is the problem why dont you just put the stock dump/front pipe back on then save for the computer then get it all done. Have you checked to make sure it was all installed properly? or did u tell your mechanic the situation?

Link to comment
https://www.sau.com.au/forums/topic/217298-is-this-common/#findComment-3837129
Share on other sites

Yeah as others have said.

I'd get it on a dyno.

Check the AFR's, fuel pressure, boost pressure and other basic things while there and get an idea of where the car it at.

Then workout what area it is thats needing the attention

Link to comment
https://www.sau.com.au/forums/topic/217298-is-this-common/#findComment-3838232
Share on other sites

  • 2 weeks later...

what? thats impossible, then why go for an extra dump pipe if you ain't going to tune your car?

What you guys are saying goes against the theory a turbo back gives more power than a cat back (with no tune).

Does this power loss theory with an extra dump pipe also apply to GTT R34's??????????????????

Edited by 10MinuteCar
Link to comment
https://www.sau.com.au/forums/topic/217298-is-this-common/#findComment-3866199
Share on other sites

Does this power loss theory with an extra dump pipe also apply to GTT R34's??????????????????

Its even worse on a 34gtt, i dynod one stock, then he came back with a full turbo back 3.5in, and front mount. It gained 5rwkw up top and lost about 30rwkw everywhere else. Put a pfc on it and got it all back and heaps more.

Link to comment
https://www.sau.com.au/forums/topic/217298-is-this-common/#findComment-3866266
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
    • Yes it is ATF. I quote @Duncan "it takes a good synthentic auto trans fluid like Castrol Transmax Z" It's not a diff. It's a transfer case. Totally different thing. Yes, fluid will come out the sender hole. No you do not really need to drain it. Just pull the old, quickly poke the new, clean up and top up. But realistically, you should probably take the opportunity to change it anyway.
×
×
  • Create New...