Jump to content
SAU Community

Recommended Posts

  • Replies 92
  • Created
  • Last Reply

Top Posters In This Topic

back together again!!

only a few loose ends to tidy up and she's ready for dyno tuning Friday afternoon to handle the bigger injectors :P Justin at Competition Tuning and Performance will be doing the tuning.

also thanks to Mobile Auto Hoses for helping us out a little with the cost of the turbo lines.

upgrade.jpg

congrats to Beau today who made it through to the top 12 in Driftstate at QR today.

He qualified in 17th position out of 24, then won his first battle after a re-run. Then in his second battle, he drove the car out of sight, but the other car simply had more power and Beau couldnt keep up.

However I was very happy with the way he drove and once we get a chance to put a big power motor in the drift car, I am confident that Beau will do really well in future events.

there was about 8 other cars there over 400hp@rw , I lost to a 415rwhp 2.2 tomei 180sx that is about 970kg , mind you he is bloody good too , just finished 5th two weeks ago at DA Adalide

Had the QLD r2 State championship on sunday , first time driving it with it's new setup turbo , it was a shame I had to take off my tower brace to fit it on as the front seemed to wash out a little coming out of a turn , and I have lost my 2nd gear sycros .

So had practice from 10 , got about 3 laps in and found I was lossing power , opened the hood and found out I had melted a cooler pipe as it was too close to the manifold , so had to rush around to the supercheap to buy and then fit a new one , and also make a section of heat shield to make sure it does not happen again .

Then came qualifiying , I had one more practice lap to check the setup which felt good , so I lined up for my first qualifying lap , started out great but I missed 3rd going into the dipper and went into 5th , but managed to recover and get through without to much trouble. My second qualifying went well besides a little bit of dirt turbo .

Ended up qualifying in 17th and had my first battle up against the TOKAGE soarer driven by Josh Botcher , a well proven driver who normaly drives his FC rx7 , but due to brakege was picked to drive for the TOKAGE company.

First lap I was chasing , and I managed to stick very close but at the cost of losing angle a few times , lead lap I hit the dirt once which was being judged very harshly , so it went to a re- run where as the Soarer spun both times due to a bad tyre , so I was through to top 16.

Next battle was against my very good friend Eugene in the Federal/Mercury 180sx , a seasoned DA competitor in a 400rwhp 2.2 tomei 970kg fully built drift rig. First lap I was chasing and lets just say he pulled away with his foot to the floor , and on my lead lap he followed very well , so I was knocked out , but was told by many people that it was a very close battle considering the power difference. I was told later that with my score against Euge that I made 12th place

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah that is not actually a lot. Just painting my GTR frontend and the little bits to make sideskirts/nismo flare pieces work correctly/fit on the sedan/mount up correctly came to about $7000. Is it a lot? Sure. None of this is economical. Economy would be shelling the car and buying a 2010 Corolla to commute in. The perspective of all of this is different.
    • I have the 2025 build re003s’ on my 06 XT Forester Turbo and I quite rate them for street wet and dry
    • I don't see any issues here. I've been saying all along this is a big job, the price reflects that.  When the car comes back perfect I'm sure it will feel like money well spent. 
    • Remember, take original quote. Double it. Then add a bit more. It's how any project goes.
    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
×
×
  • Create New...