Jump to content
SAU Community

Recommended Posts

Hi All,

Im trying to decide If its going to be worth buying a SAFC for the stagea. First up at the moemnt its stock except for a Electronic boost controller and a FMIC. These are all I plan to do for the moment, but I probably will install a more free flowing exhaust sometime in the future.

The only real reason Im tempted to install a SAFC is to improve fuel economy slightly. Truth be known power gains are not really of any concern as stock it had enough power behind it, especially coming from my first car a Hyundai Sonata hahah! (Yes stag is my 2nd car :D )

So a few questions:

How much will I be looking at to get the SAFC tuned?

Will I gain much in fuel economy?

Will A SAFC be ok or will I be better of with a SAFC2? (As i have Hi and Lo setting of boost)

The reason I'm unsure about getting one is Im not sure how much fuel I will save and I would sort of like to be able to draw a line somewhere with how much money I throw at this car.

Cheers,

Chris

Link to comment
https://www.sau.com.au/forums/topic/218224-safc-are-they-worth-it/
Share on other sites

G`day Chris having just put exhaust turbo back i would say do the free flow exhaust first ,no point in try to do other mod`s if you can not flow GASES,stock exhaust is a block let it flow somethink, some of the lad`s have gain 15 + kw from that a lone.good luck ,cheer` chuckie

Ive installed an SAFC neo($400), dyno tuned($300), better power, but does nothing for fuel economy because SAFCs on Stageas are only effective in open loop, ie high throttle. In closed loop the ECU will read the O2 sensor and adjust fuel mixture accordingly no matter what the AFM is saying, to a point. My dyno tuner didnt even bother with the low throttle settings on my SAFC.

Ive found the best way to improve fuel economy is a good set of platinum plugs.

yeah, all depends when the ecu goes into open loop, probably around 20 to 40% throttle. So the SAFC will work when under power, but not cruising. If you do an experiment and sit on highway speed, try to lean out SAFC as much as possible, the ecu will quickly readjust back .

explained better here: http://www.turbo240.com/forums/viewtopic.php?t=18

exactly right^^^^^ It helped my afr's at higher loads and helped with power (made 160kw at all 4 with just zorst and fmic 10psi) but fuel is no better really. I'm going to do a manual conversion soon and go with an aftermarket ecu. Hoping this will help.

thanks to mcnamg I allready have Splitfires and a pretty fresh set of plugs....

Do as Chuckie said and finish building your exhaust to get rid of the back pressure in the system.

If you're after better fuel economy change your coils to Splitfires and throw in a fresh set of plugs.

Thanks for that chuckie, As i stated im not really after a power gain from the SAFC so dont really want to do a zhorst at the moment...

Trying to see how much fuel id save ect....

one of the 1st mods on any vehicle is to piss off the standard exhaust, more so on a turbo car, you say you want to address your fuel consumption well about the best way to do that is to install a well made quality system from the turbo back, you will notice an immediate improvement, then look at your tuning avenues.

goodluck.

kidafa are you in WA? should of bought my car. would of saved you a lot of effort :)

I have SAFCII, high flow cat back exhaust, profec B and splitfires lol

Whats your fuel economy now?

I'm geting around 480kms per tank and thats boosting every now and again...

Will be interesting to see what you get with each mod install.

My experience with a safc2 was very positive. With an exhaust, air filter,fmic etc. I was averaging 360km on a full tank. I had the S-AFC tuned and boost increased to 10psi (bleed valve) and the economy went up to 420km+ with a nice increase in power. I then replaced the o2 sensor and the economy went up to around 450km per tank.

Mine was definitely tuned with low throttle settings.

I'm currently using an e-manage, which does more or less the same job.

  • 2 months later...

Well its time to bump this thread....

Ive had so many mixed answers about getting a SAFC to improve fuel usage... I see many posts that include people recomendind a SAFC to improve. But on the other hand many people say it wont be worth it due to them only working properly on full throttle.

I've spoken to onme of the tuners from Graham West Workshop and he said its not worth it, While many people on here say it is and some say it isnt...

Current mods are:

Boost controller (high set at 10psi)

FMIC

Splitfires

Getting at most 400k's out of a tank on my s1 1997 rsfour :D

kid.. i rekn stagea girls display pic says it all :D unluckyy! harden up get outa the bike shop n earn sum real $ :banana: for what ya gna spend on mods n stuff.. zorst grand at the least. safc.. bout half that to get it tuned and installed.. for the extra 30km...(1 day of driving if not less) its probly not worth it! smartes move would be to buy shares in bp! :P it all rapes us once a week atleast!

i run a neo safc it didn't give me better fuel consumption it gave me 18 extra kw with the same consumption,what improved my consumption to 480-500 was a locally built s/steel split f/dump with full 3 1/2'' system

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
×
×
  • Create New...