Jump to content
SAU Community

Recommended Posts

it is going to improve things on increases throttle changes not steady state driving as the factory ecu will lean it back to stoic if the O2 sensor is working on steady state.

ultimately the best option is full engine management but the SAFC is TOTALLY WORTH IT (i'm with tangles).

Fuc# yeah.. this is what i want to hear.... Any one want to make an estimated guess on how many k's i might pick up per tank?

Also Installing it woudlnt be to hard by the looks of things... Many people do it themselves?

Cheers.

ok well going on your mods and what I already have, I am now getting 500 to the tank... I push my car that little further and she gets me up to the 500km mark everytime and I fill her up in time lol

so you'd gain an extra 100ks per tank

Oh this is on 98 vortex, bp ultimate gets me about 40ks less...

currently sitting on 350k's to this tank on BP 98... Havent driven it hard at all and im just waiting for the light to come on saying shes thirsty.

So do you guys recomend i install one my self?

Should i get a SAFC, SAFC2, SAFC neo? what you recomend?

A second hand SAFC2 for $200-$250 with all the gear is reasonable, or a new SAFC Neo off ebay for the <$390 mark is a good buy.

When I get mine, I'll install it myself, then get Shaun to tune it.

:D

Edited by RubyRS4

If you can find an SITC and SAFC2 for around $500-$550 all up delivered, thats good

$200-$250 install & tune at Boostwerks getting everything right

with stock exhaust you'll get much better fuel economy

however with full exhaust you'll get better economy and more powah !! :D

do I really need the SITC as well as the SAFC?

When you lean out the A/F with the SAFC you may get detonation (pinking or knocking). Without a SITC you will have to retard the base timing to get rid of it. With a SITC you can tailor the timing throughout the rev range to get maximum advance without knock. So it is desirable but not necessary - you may want to spend your money on a new front pipe first.

The SAFC is definitely worthwhile!! and if you're keen, as mentioned above, get the SITC as well for extra tuneability. However you can make do with a SAFC very well and the SITC's are quite rare so you may find them difficult to get hold of anyway. I only had an SAFC on my old stagea s2 and it had 160awkw comfortably. The SAFC will be fine for anything up to around 200awkw, and after that you'd probably want to look at some more advanced ecu's for better tuning capabilities.

People who say the SAFC wont affect fuel economy aren't giving the full story.

Basically the SAFC ONLY works when the throttle is past 50%. Below that, the SAFC doesn't do anything as far as I know. Above that, (ie. anything from 50% up to full throttle) it will modify the airflow signal that the ecu sees, making it supply less (or more) fuel than it otherwise would have. Usually you want to lean it out a bit, particularly at the higher revs, so this is where the SAFC will do its stuff. The theory goes that if its causing the ecu to supply less fuel at any point, then you will be saving on fuel at that point. Its more complex than this too, because the SAFC on its own will also affect ignition timing, but its still safe to say it could potentially save a bit on fuel.

Sure, it wont save you on fuel if you just cruise around and it wont affect your highway economy much since you'll only be using light throttle all the time. However, if your driving style involves heavy throttle a lot, then you WILL save on fuel. You'll only be using less fuel when the throttle is more than 50% but its a fuel saving nonetheless.

It may get you a few extra kw but for me the most thing I noticed was increased fuel efficiency and therefore more power in the low-midrange.

Since you'll need to tune it on a dyno, its a good idea to advance the timing a bit at the same time (keeping in mind that the safc will also advance the timing depending on how different the settings are to stock). By using a combination of safc tuning and advancing the base timing (at BOOSTWORX - yes, do go there!!) I managed 10kw extra at the top end and the car just felt so much more responsive right across the revs. AND I saved over 1.5L/100km in fuel economy from that point onwards. Admittedly the advanced timing meant I couldn't use anything but 98 octane fuel, but you should probably use this anyway :D

Lastly I'll just mention that just adding an exhaust to your car, will probably be enough to make it run too rich, and will require tuning of some sort. For this sort of mild tuning, the SAFC is excellent value. and if you know what you're doing, its simple enough to make small changes yourself afterwards. Just be sure to write down the settings before changing them and then you can always return to these settings later.

good luck with it :D

Edited by pixel8r

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Input shaft bearing. They all do it. There is always rollover noise in Nissan boxes - particularly the big box. Don't worry about it unless it gets really growly.
    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
×
×
  • Create New...