Jump to content
SAU Community

Recommended Posts

Hi all,

After looking at ebay and Play Asia i cant seem to find an uncut version of GTA4 that will be pal compatible for my XBOX 360. Can someone give me a link to a place where i would find an uncut copy?

CHEERS

Are these region 4??

Will the UK version work on our XBOXs?

GAMES ARE NOT REGION CODED, there is Pal(aus) and two types of ntsc. UK is pal so it will work 100%

region coding is for dvd's

I got mine off ebay it cost me $65 including shipping and took two days on normal postage, however seems as though some people didi not get there copies and left some bad feedback so i would go with what Skyrin3 did and get it there.

I would recommend just getting one from big w for $78 as i believe a uncensored one is not warranted.

There are some noticible differences between the two versions. Personally i have both, mainly because i could not wait.

I would recommend getting the uncut version if you dont mind waiting a week to get your copy.

www.game.co.uk

UK is PAL and PAL will work on your australian xbox and game.co.uk sell only the R18+ version of the game. You have nothing to worry about.

That GAME UK has some good deals.

PS3 with GT5 and GTA4 for $700AUD delivered. Guess what im getting next month lol

I wouldnt buy a PS3 from overseas. Yes games will work, but you wont be able to play blu ray movies.

There are 3 game regions, PAL, NTSC US & NTSC JP. That goes for all game consoles current & b4, except PS3 & the portable ones, which have none.

Edited by Mayuri Krab

XBOX 260 GTA4 Multiplayer is region locked as well just FYI

Multiplayer on PS3 is not region locked...

Picked up my PS3 version from Amazon but yeah the only place you can get it for 360 is the UK

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...