Jump to content
SAU Community

Recommended Posts

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

  • 3 weeks later...

Man thats screwed.

I live in River Downs and travel that road quite a lot. will keep an eye out. glad to hear that you are ok. the ony thing with speeding is that if the cops catch you, they will try and say that you were racing or hooning, and thus confiscate your car. i guess it means that the cops are involved but it is a bad thing to have to do.

once again gald you are ok

Rolla Boy

i got followed by 2 fellas in a white vl for ages , after about 10 or so turns i pulled over and pull out the axe that i carry around and they did a u turn and took of , this is around mt. ommaney in bris.

club lock or a 4 or 6 cell mag light or some sort of large tool like a wrench would be the most legal "weapon"

Some people I know who carried baseball bats in their cars had them confiscated.

just on another note, say you got busted by a fixed speed camera going at 100+km/h how would you get away with it?

Originally posted by CerealKiller

just on another note, say you got busted by a fixed speed camera going at 100+km/h how would you get away with it?

Interesting point.

What would be our recourse if we were the victim of an attempted car jacking, especially if we went to the police straight after the event, showed them the physical damage to the car and made a formal complaint.

If we then received a speeding notice in the mail, would we have enough extenuating circumstances to get off (like if you can prove that your car was used for a medical emergency, you can get off)?

Might be one to be decided in the courts methinks.

Originally posted by sweetr33

AHH but if a speed camera got u it would more than likely get them aswell coz they are chasing u. Could be a good opportunity to find out who the dudes were>??

Yeah you would hope so.

But hypothetically I was thinking that the next time I get done by a speed camera, I might just put a bit of paint damage to the rear bumper, go to the police and claim that someone was trying to car jack me.

Might work - Hypothetically of course :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...