Jump to content
SAU Community

Recommended Posts

i tried on 18s yesterday and they were scrubbing on the inner side on the arm that goes up to the camber adjuster(front), i would need to run 5mm spacers to fit them, back was fine heaps of room. these were 30 offset.

This bracket it was rubbing on only seems to flare towards the outside of the car as it gets higher, so bigger rims would have even more trouble?

Please if you know , reply here. If your just guessing, dont bother and you might just learn something.

ps, please no comments about 20s are too big or ugly or whatever, i dont care. Im just interested to know this.

thanks Dave

Edited by dave_1
Link to comment
https://www.sau.com.au/forums/topic/219859-20s-on-a-r32-possible/
Share on other sites

yes bigger rims will have more/frequent rubbing.. you may also require some rubbing.. the amount of rub will also be affected by weight in the car (more ppl) and bumpy roads etc.. it'd be hard to get them not to rub.. also you will most prob get problems on tight turning (at least on full lock) as the tyre will rub on parts inside the wheel cavity..

ps.. 20's look shmick >_< fill in the gap.. however it's also worth noting that it's not legal (apparently so i've been told) that you cannot put tyres on that are 2" above standard ie. 19's is the max on 17's as standard.. *Could be wrong, just what i've been told by roadworthy mechanics*

what offsets/width?

if ur scrubbing on the inside and need a 5mm spacer then same width/offset is gonna do the exact same thing.

^ the rule is for rolling diameter which includes ur tyre profile as well. doesn't just go on rim diameter. its stock rim diameter + profile vs new rim diameter + profile.

but yes, 20's r gonna be over obviously :)

ps.. 20's look shmick :D fill in the gap.. however it's also worth noting that it's not legal (apparently so i've been told) that you cannot put tyres on that are 2" above standard ie. 19's is the max on 17's as standard.. *Could be wrong, just what i've been told by roadworthy mechanics*

the first part is correct, except about the 20's looking good lol. standard rims on a r32 are 16" however, so 18" is the limit. there a new law coming in, apparently its already in SA where u can go as large rims as u want as long as it doesnt affect the overall diametre by some small amount. but i wouldnt risk it.

as for 20" rims clearing, it is possibly with the right width, offset, tyre size/profile etc. but as mentioned before, the law says no, and so does baby jesus.

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
×
×
  • Create New...