Jump to content
SAU Community

Recommended Posts

Hi Alex,

I'm no expert when it comes to oil but some peoples ideas on this forum (not this thread) can be totally wrong. Remembering oil is a very complex item and in terms of lubrication, there are many tradeoffs from start up lubrication to hot lubrication, and the amount of heat the oil transfers around the car.

In reply to your question Alex the 10w-60 seems ok for Canberra all year round. The manual (for my car and I believe yours) says 7.5-35w oil. So a 5 or 10 weight oil when cold should be fine. The higher number (hot) can generally be as high as you want, if you are racing the 60w is when most people recommend as the oil gets very hot and as you probably know oil thins out the hotter it gets, daily driving 40 is fine as the oil never reaches really high temperatures.

I've been running Shell 5-40w but I will be using the Castrol 10-60w in Summer or for any track days.

I've never changed oil on an RB25 but it can't be as hard as the RB26. Just don't rev the engine to get the last bits of oil out :-)

Link to comment
https://www.sau.com.au/forums/topic/220214-what-oil/#findComment-3884876
Share on other sites

Hi Alex,

I'm no expert when it comes to oil but some peoples ideas on this forum (not this thread) can be totally wrong. Remembering oil is a very complex item and in terms of lubrication, there are many tradeoffs from start up lubrication to hot lubrication, and the amount of heat the oil transfers around the car.

In reply to your question Alex the 10w-60 seems ok for Canberra all year round. The manual (for my car and I believe yours) says 7.5-35w oil. So a 5 or 10 weight oil when cold should be fine. The higher number (hot) can generally be as high as you want, if you are racing the 60w is when most people recommend as the oil gets very hot and as you probably know oil thins out the hotter it gets, daily driving 40 is fine as the oil never reaches really high temperatures.

I've been running Shell 5-40w but I will be using the Castrol 10-60w in Summer or for any track days.

I've never changed oil on an RB25 but it can't be as hard as the RB26. Just don't rev the engine to get the last bits of oil out :-)

an important thing to note, is that while you are definitely correct in using thicker oils in racing, for daily driven purposes using too thick of an oil can be detrimental in the worst cases. certainly with cars like skylines, people want to rev the engine occasionally, however the cars may only be used for 30-40 minutes at a time. if i recall properly the best viscosity for protection at high revs is between 10-15 centistokes. for a 10w-60 oil to reach 15cs it needs to be over 120 degrees C, while 10w40 needs to be over 100degrees C. 10w40 only starts to become too thin over 120degrees.

the problem is at 90 degrees C, 10w60 oil is still 30cs and too thick for revving an engine. high engine speed and high viscosity can lead to foaming and worst of all cavitation

im not an oil expert either, im just saying its important to identify what purpose your oil needs to fulfill, racing protection or daily longevity. for my next oil change ill probably get a synthetic like 5w-40 or 0w40 as the viscosity offers more protection when the car is first started at low temperature. your current shell 5w-40 sounds like a good bet for daily use, perhaps its a good idea to put in thicker oil specifically for a track day, but run the thinner oil when you go back to daily use

Link to comment
https://www.sau.com.au/forums/topic/220214-what-oil/#findComment-3885794
Share on other sites

an important thing to note, is that while you are definitely correct in using thicker oils in racing, for daily driven purposes using too thick of an oil can be detrimental in the worst cases. certainly with cars like skylines, people want to rev the engine occasionally, however the cars may only be used for 30-40 minutes at a time. if i recall properly the best viscosity for protection at high revs is between 10-15 centistokes. for a 10w-60 oil to reach 15cs it needs to be over 120 degrees C, while 10w40 needs to be over 100degrees C. 10w40 only starts to become too thin over 120degrees.

the problem is at 90 degrees C, 10w60 oil is still 30cs and too thick for revving an engine. high engine speed and high viscosity can lead to foaming and worst of all cavitation

im not an oil expert either, im just saying its important to identify what purpose your oil needs to fulfill, racing protection or daily longevity. for my next oil change ill probably get a synthetic like 5w-40 or 0w40 as the viscosity offers more protection when the car is first started at low temperature. your current shell 5w-40 sounds like a good bet for daily use, perhaps its a good idea to put in thicker oil specifically for a track day, but run the thinner oil when you go back to daily use

Hey Zoomzoom sounds like he knows what he's talking about. We had to find someone who could put some science behind it.

Just remember get the oil that is classed as a fully synthetic oil and also remember that different oils of the same rated viscosity can react differently.

I remember a certain mechanic telling me the 5-40 weight oil was too light for the GTR when cold (the 5) and that was why I was having a leakage issue.

Link to comment
https://www.sau.com.au/forums/topic/220214-what-oil/#findComment-3887759
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...