Jump to content
SAU Community

Recommended Posts

ANDRA 2007/2008 Rule Book

Section 4.8 - Electrical Control

4.8.1 - Batteries

All wet cell batteries must be located outside the driver or passenger compartments and must be securely mounted. Unless otherwise specified in class regulations, any number of batteries may be fitted, provided the combined weight of all batteries does not exceed 68kg (150lbs). A 75mm (3 inch) equilateral triangle, coloured blue, or another contrasting colour where necessary, is required on all vehicles fitted with a wet cell battery or batteries to accurately indicate their location/s. All competition cars quicker than 12.00 (1/4 mile) / 7.70 (1/8 mile) require a battery isolation switch located in the battery location marker. capable of shutting off current flow and operable from the exterior of the vehicle. This is highly recommended for all other vehicles. It is also recommended that sedan vehicles with trunk mounted batteries have a trunk key permanently fitted to the lock. In open cars, where battery spillage over the driver may occur, the battery should be covered and vented to a safe area.

Dude, call ANDRA 08 82715355 and have them send you out a rule book. It has all of this info at your fingertips.

Thank you - must get a rule book -been meaning to -just never seem to get around to it - slack really - thanks

ANDRA 2007/2008 Rule Book

Section 4.8 - Electrical Control

4.8.1 - Batteries

All wet cell batteries must be located outside the driver or passenger compartments and must be securely mounted. Unless otherwise specified in class regulations, any number of batteries may be fitted, provided the combined weight of all batteries does not exceed 68kg (150lbs). A 75mm (3 inch) equilateral triangle, coloured blue, or another contrasting colour where necessary, is required on all vehicles fitted with a wet cell battery or batteries to accurately indicate their location/s. All competition cars quicker than 12.00 (1/4 mile) / 7.70 (1/8 mile) require a battery isolation switch located in the battery location marker. capable of shutting off current flow and operable from the exterior of the vehicle. This is highly recommended for all other vehicles. It is also recommended that sedan vehicles with trunk mounted batteries have a trunk key permanently fitted to the lock. In open cars, where battery spillage over the driver may occur, the battery should be covered and vented to a safe area.

Dude, call ANDRA 08 82715355 and have them send you out a rule book. It has all of this info at your fingertips.

Thank you - must get a rule book -been meaning to -just never seem to get around to it - slack really - thanks

your building a car and don't have a rule book? Better to build the car around the class you intend to race in and refer to the book when you need something clarified. That way you can do it once and do it right. I know a couple of people who built cars and did not have a class to race them in....silly buggers!

Edited by DiRTgarage
the rule continually states wet cell battery, i cant see why you couldnt run a dry cell battery inside the cabin.

I just got a reply from ANDRA saying that dry cell batteries can run in the passenger compartment provided they are adequately secured.

your building a car and don't have a rule book? Better to build the car around the class you intend to race in and refer to the book when you need something clarified. That way you can do it once and do it right. I know a couple of people who built cars and did not have a class to race them in....silly buggers!

I can see your logic - it's not quite as bad as all that LOL - my friend has a book and i have been using that as well as the net - the reason i asked was someone did mention to me in the past about battery inside - now through doing this we all know that a Dry cell is cool , beauty - thats what i will do then , thanks for your efforts - OH yeh i shall fasten with Blue tack - what ya reckon lol?

Speaking of batteries has anyone had any luck with these pulse batteries as they seem fairly cheap.

http://www.pulsehyper.com.au/phb400.htm

They look tidy - personally never seen them - where do they retail from?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
×
×
  • Create New...