Jump to content
SAU Community

Recommended Posts

Yes please. I just want to see how it looks on a skyline when it's installed. Just the front view is enough. It seems this style of FMIC isn't very popular in the market as i can't really find pictures of it on the internet.

Edited by teng
Thanks R-SPEC.

no probs

Totally off topic R-Spec that R34 looks bloody hot! I usually hate any imports in red but that looks great!

thanks :bunny:

where can I find an ARC return flow cooler?

preferrably an alternative to stealing R-SPECs one..

lol my kit wont fit your rb20 :down:

if you want a good deal on an arc kit let us know...

  • 3 weeks later...
Abu, when you get a ARC return flow cooler, please post images of it here.

Thanks.

No worries, I currently run a blitz turn flow so if you want I can post pictures of that

Blitz ones are probably a little bit easier to get your hands on over an ARC and possibly a little cheaper also

Heres a full DIY install of the arc cooler, looks alright, but in my opinion the cooler is far to small, hence why you can see the end tanks and piping when the bumper is fitted which is a bit ugly.

http://www.skylinesaustralia.com/forums/R3...html&hl=arc

  • 2 weeks later...

Here's mine with the ARC Turnflow FMIC Installed. Uses stock mountings and didn't even have to relocate the horns. Just a bit of bumper grill cutting. Overall installation job time, 6hours cause i had to sand and paint the front bumper bar as it's all rusty. Same goes for the under car, all rusts. Needs lots of sanding then painting. That's what you get when you buy a car that is over 9 years old and has over 200k on the odometer. lol

post-48477-1214094899_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...