Jump to content
SAU Community

Recommended Posts

hi, just wanted to confirm the remours ive been told about the r34 GTT auto trans. Can you change it over for an apexi copmuter and get it tuned with out any problems or do you still have to keep original comp and use a piggy back ? whats the best way to change/or piggy back it with for better perfomance ?

Link to comment
https://www.sau.com.au/forums/topic/221227-computer-upgrade-r34-gtt-auto/
Share on other sites

power fc will work, however Id strongly suggest a good auto gearbox shift kit

over time the gearbox will die an ugly death tho, will eventually need a rebuild

Wash your mouth out! POWER FC WILL NOT WORK ON AUTO R34's once you remove the ECU, you've also removed the ECM that controls the tiptronic, you *WILL* be stuck in 3rd gear, do not pass go, do not collect $200

ah ok.

my bad. soz for bad advice.

I said shift kit, as that will help minimise the gear change time, seeing that the P-fc has no ignition retard on gear changes.

meh, piggyback it then :O

or talk to Toshi, Im dealing with him atm for a remap chip for my stagea (r34 plug). I had an r34 gtt power-fc and assumed itd work for an r34 like it would for my non-neo rb25det, but decided I cant afford a shagged gearbox.

ah ok.

my bad. soz for bad advice.

I said shift kit, as that will help minimise the gear change time, seeing that the P-fc has no ignition retard on gear changes.

meh, piggyback it then :O

or talk to Toshi, Im dealing with him atm for a remap chip for my stagea (r34 plug). I had an r34 gtt power-fc and assumed itd work for an r34 like it would for my non-neo rb25det, but decided I cant afford a shagged gearbox.

Yeah the Stag used a similar setup to the R33's remote ECM that still controls shifts...much like the R34 25GT, the GTT got the raw end of the deal so can't use the FC

I'm going for +1 for remap as well, I've got a USB remappable daughterboard, cost me all of $200 and lets me frig with the tune to my hearts content via laptop.

ok, is there any suggestions to whixh brand ecu that will work with it, or it wont work ? is there anyone out there who has done it? will i kill my transmission some time soon or it ll be ok for the longrun if looked after with care ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
×
×
  • Create New...