Jump to content
SAU Community

Recommended Posts

Hello there i have a 1990 GTS4

i was wondering what tyre size set up i should have since the attessa the rolling diameter needs to be the same? sorry

yes i tried the search feature but i think its not working for me

do you guys with R32 GTR and GTS4 mind sharing with me your tyre setup for track, streets and twisties please??

originally i was thinking 265 rear and 235 front?? on 18" or am i getting it all wrong??

cheers,

Link to comment
https://www.sau.com.au/forums/topic/222561-r32-gtr-or-gts4/
Share on other sites

Yes, the ROLLING DIAMETER needs to be the same on ALL FOUR CORNERS. The simplest way to achieve this is to run the SAME SIZE TYRES on the SAME SIZE RIMS on all 4 corners. (Also simplifies evening out tyre wear by swapping F<->R).

I'm going to recommend switching to 17s, because you get a bit more sidewall flex available (you should note F1s run quite a tall profile tyre , especially on the rear)

Link to comment
https://www.sau.com.au/forums/topic/222561-r32-gtr-or-gts4/#findComment-3922858
Share on other sites

Can I just ask?

From what I read, you already have the rims.

What size/width/offset are they?

Basically, yes.. you need the same rolling diameter all the way around.

Im running 205/45/16 on an 8 inch rim.

Stretch means less sidewall flex..

sidewall flex is VERY scary through the twisties..

Also, caster (spelling?).. try increasing caster so as the steering wheel straightens up easier during oversteer.

The rest is all up to you.. It depends how you drive. See if you over/under steer and then adjust strut/sway bars and height/damper rates according to what your experiencing, what you like and what you dont like..

It takes a while to get that sweet spot but once you got it.. gosh its awesome!

Link to comment
https://www.sau.com.au/forums/topic/222561-r32-gtr-or-gts4/#findComment-3929835
Share on other sites

You can run 235/40/18 on the fronts and 265/35/18 on the rears to get a very close rolling diameter front and rear. Thats what I use on my street rims.

Or else you can just run something like 265/35/18 all round if it'll fit your guards, and if your rim is wide enough.

Link to comment
https://www.sau.com.au/forums/topic/222561-r32-gtr-or-gts4/#findComment-3929858
Share on other sites

my rear guards been flared out so i can fit the 265/35 at the back..but i was gonna go 235 for a move linear price range on tyres an slicks.. on a 17" 8" or 9" wide?

like i can afford the 18" tyres no problem but some times its abit difficult trying to find a place that always stocks the 18" and also since i havnt flared out my front guards i dont really want to want to go to the hassle of playin with different sizes

even though Yawn your tyre set up for street sounds pretty decent.

but since 17" are fairly common i might move into that area cause later i want to move into track since i used to do it on my motorbike..

thast why im asking all these noobish questions.

but what offset would be good for a GTS or a GTR. also should i be using a 8 or 9 or even possibly a 7.5" wide rim?

cheers

Link to comment
https://www.sau.com.au/forums/topic/222561-r32-gtr-or-gts4/#findComment-3931231
Share on other sites

Smaller width tyres on the front is not good for handling balance in a nose heavy 4wd. Your car has over 60% of its weight on the front tyres and around 40% on the rears. That's why they understeer. Plus it does close to 80% of its braking on the front tyres. Smaller front tyres simply increase the understeer and decrease the braking potential. So why in the hell would you want to have less grip on the front than the rear?

Cheers

Gary

Link to comment
https://www.sau.com.au/forums/topic/222561-r32-gtr-or-gts4/#findComment-3935038
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...