Jump to content
SAU Community

Recommended Posts

I am currently in the process of looking around to try and find a new set of wheel. Firstly i have a r33 gtst. it is dark gray in colour, and currently stand at the normal height. i have only done the exhaust so far. Before i get any major engine works done i want to have my car looking good. the work i have planned for the enginge is bigger f**k off front mount, greddy forward facing plenum, fully forged engine, computer, bigger turbo (HKS GT Sports possibly), then obviouslvy all the supporting mods to suit.

Anyway back to the wheels, i am currently looking at a set of Volf Racing CE28N. Can any one help me with the offset size. I am looking at getting 18"x8.5" on the front, and 18"x9.5" for the rear. Also can anyone them me a rough price that these wheels can be bought for, cause i am trying find out if $2220 is a good price for brand new wheels.

I only have the standard brakes all round and just worried about clearance on the front calipers.

Edited by jonzie26
Link to comment
https://www.sau.com.au/forums/topic/222597-volk-racing-ce28n/
Share on other sites

you can go bigger... (lower offset)

i'm running 18 x 8.5 +30 & 18 x 9.5 +30 and they sit out of the stock guards by maybe 10mm but with 225 / 245 tyres streched on they fit under perfectly :thumbsup:

ssr1.jpg

and for reference sake this is old rims at 18 x 8 +37 & 18 x 9 + 30

old1.jpg

that pic is with the stock suspension setup btw...

now with greddy coilovers, castor rods and camber bolts they sit out a little more (looks heaps better than pic) but sif gettin pic @ 1:50 in the morn

  • 1 month later...

Can anyone tell me if these wheels will stick out past my gaurds. Casue i have no idea. the wheels are 17" Work Xd9s x 8.5 +30 offset. Can someone tell me if it will work casue i am unsure, and i dont want to have to go and flare my guards.

Can anyone tell me if these wheels will stick out past my gaurds. Casue i have no idea. the wheels are 17" Work Xd9s x 8.5 +30 offset. Can someone tell me if it will work casue i am unsure, and i dont want to have to go and flare my guards.

They will fit fine.

Here are my size's

Front 18x8 +28

Rear 18x9 +30

The 17" xd9's you are looking at getting will sit like this compared to what mine sit like.

Fronts = will sit 4mm closer to the gaurds and the inside of the wheel will sit inside the gaurd 8mm more than mine, so these will fit fine!

Rears = will sit inside the rear gaurds 6mm more than mine and the inside on the wheel will sit inside the gaurds 6mm more than mine, so these will also fit fine, but will sit inside the gaurds a little bit.

To be honest i would be looking at other sizes/offsets , yes they will fit fine but they will sit inside the gaurds a little bit, not so much the front as they will extend more than mine, its the rears that will sit in quite a bit, i guess you could always get some bolt on spacers.

Heres what mine look like, keep in mind that my car is pretty low so i have a bit of negative camber, hope this helps anyway!

_MG_6562.jpg

100_2037-1.jpg

JaysR33116.jpg

01-08-07gotthem19.jpg

01-08-07gotthem24.jpg

Cheers

Edited by nizmo_freek
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...