Jump to content
SAU Community

Recommended Posts

I know some people dont like the Ignition Bling but this will change your mind about our DVDs

I don't mind some of the bling but I'd love to see a special on Australian Skylines with a challenge between cars on all 3 majors (Circuit/Drag/Dyno). Who has the best overall car?

I don't mind some of the bling but I'd love to see a special on Australian Skylines with a challenge between cars on all 3 majors (Circuit/Drag/Dyno). Who has the best overall car?

doesnt need to be done...Berry/Neuman GTR is the best overall car...no doubt

That the hi octane 32?

yep sure is...if you threw two more catergories in like Street and Show i think we would be in with a fair chance.

mark and russels car runs blistering circuit times, runs 10.2 at the strip and makes over 400KW at the tyres so its a great 'allrounder'

yep sure is...if you threw two more catergories in like Street and Show i think we would be in with a fair chance.

Interesting, but Street and Show are not exactly definable so this leads to disputes. Registered could be another entry point, is Mark and Russels car a road registered weapon?

it will be available online in 10 days and at stores in 3 weeks. wont be sold at Newsagents due to a lisencing deal with a diributer

Where in West Australia will this be available as the only ignitions we get now are the ones bundled with magazines :cheers:

Ignition hasn't been bundled with magazines for quite a while and won't be from now on.

In West Australia it is the only way to get Ignition DVD well thats how i have got the last 10 or so and i am up to number 30.

they are NOT for sale any other way over here!!

i was getting them through a newsagent independently at first then they could not get them any more except being bundled with hot4's

so my question still stands

Where the hell in Western Australia will i be able to get this issue from ??

Edited by gazza750

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...