Jump to content
SAU Community

Can I Put Rb26 Into Gts4 Shell?

23gtr32
 Share

Recommended Posts

Beer Baron Grand Master

Beer Baron

Posted
Posted

gts4 is closer to 4.4 (4.375:1 to be precise) you will need to install your GTR rear diff too. or you can keep your rear GTS4 diff (i wouldn't, they are rubbish) and take the crown wheel and pinion out of the GTS4 engine and put that into your 26. or a third option is to take the crown wheel and pinion off both the front and rear GTS4 diffs and isntall the rear one onto your GTR diff and the front into your 26. then you have the GTS4 ratios but with the GTR rear diff (front diffs are the same apart from the ratio so no real change there).

23gtr32 Enthusiast

23gtr32

Posted
  • Author
Posted
gts4 is closer to 4.4 (4.375:1 to be precise) you will need to install your GTR rear diff too. or you can keep your rear GTS4 diff (i wouldn't, they are rubbish) and take the crown wheel and pinion out of the GTS4 engine and put that into your 26. or a third option is to take the crown wheel and pinion off both the front and rear GTS4 diffs and isntall the rear one onto your GTR diff and the front into your 26. then you have the GTS4 ratios but with the GTR rear diff (front diffs are the same apart from the ratio so no real change there).

thx mate that's pretty pro... i kept all the diffs and drive shafts...... hope i can get gts4 shell

nizmonut Community Regular

nizmonut

Posted
Posted (edited)
IS the GTS4 rear diff ratio the same as the GTR front diff ratio?

Thought I may throuw it out there..

gts4 is 4.3 diff ratio isnt it? and gtr is 4.11 from memory, thats what i got told anyway :P
gts4 is closer to 4.4 (4.375:1 to be precise) you will need to install your GTR rear diff too. or you can keep your rear GTS4 diff (i wouldn't, they are rubbish) and take the crown wheel and pinion out of the GTS4 engine and put that into your 26. or a third option is to take the crown wheel and pinion off both the front and rear GTS4 diffs and isntall the rear one onto your GTR diff and the front into your 26. then you have the GTS4 ratios but with the GTR rear diff (front diffs are the same apart from the ratio so no real change there).

how bout just stickin the gtr front centre and rear diff, housings and all in the gts4???

Edited by nizmonut

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Torana Lx Gtr Hatch, Lots Of Pictures

      By MBS206 · Posted

      I'll just leave this with, holy shit, those cars at work are awesome, and this will look wicked!
    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Could you modify this duct so instead it pushes the extra air through the radiator too and not down and out? For temps, I know it's not the greatest idea, but as a bit of a last resort, you could use a very intermittent misting spray onto the front of the coolers/rad. You don't want to be soaking them such that water is dripping off, but a small most on/off so that the water evaporates. That point of it constantly evaporating, rather than being soaked in water, will pull a LOT of heat out of the cooler. I'm literally thinking just the little mist sprayers for a garden from Bunnings. Being in a low humidity climate it will help even more! The other trick if you want to be ghetto is some shade cloth hung in the opening, and keep it wet. Pretty much now it's acting like an evap cooler on a house, but cooling the air you need to use to cool the radiator...   On a topic to think about too though, when air enters through the bumper, is it all nicely ducted from the edges of that opening back at a nice angle, or is it like most cars, and the edge of the opening just stops, and suddenly it's wayyy wider behind that? If it does the later, get it shrouded out at nice angles. When that opening changes too rapidly, it can actually cause a high pressure zone between the front bar and radiator, and limit air flow into that area, which means less air for cooling, as it effectively stalls the air, AND adds to drag...
    • soviet_merlin
      Wheel refurb?

      By soviet_merlin · Posted

      Do you have any before and after photos? That's $200 just for the hydro blasting?
    • fatz
      Beers and skylines Fatz style

      By fatz · Posted

      Yea pedal box and no abs
    • zoomzoom
      WGNC34 Rear springs

      By zoomzoom · Posted

      It doesn't look like there's a lot of options out there these days, and what's out there is performance oriented aftermarket stuff (with the GTR markup) I wonder if there are other cars with similar springs, after all its just a matter of length, diameter and stiffness. Alternatively, I did see coil spacers. Probably not the best option, but could be serviceable too.  
×
×
  • Create New...