Jump to content
SAU Community

Recommended Posts

Got the head back last week. It better go as good as it looks.

It's had 13hrs worth of porting done, valve seating, head plained, new heavy duty valve springs and cam followers.

The cams are new 280° to match the intakes.

itbs006mk5.jpg

We just have to setup the cams in the head and it's ready to go on for the test fitting of the itb's.

Hopefully the fabrication of these will be done in the next week or two.

The ports have had a lot of work done on them to change the size and entry angle of the port to the valves, should make a good difference there.

This week I have to sus out an ECU to run the thing.

  • 1 month later...
  • 2 weeks later...

oh man..

oh baby..

that so farkin hot!

Could I ask a rough price for the project?

Could you write up how much better the responce is? how much and where in the rev range the improvements where?

Edited by GTS4WD

Dunno Rach, just kinda doing it on the side. At the moment I'm waiting for some alloy tube to turn up for the runners, then it's a matter of getting it all tigged up.

Think I'm going to run a Link G3 with a tps and map.

You think thats hot, wait till I've got the trumpets on it, mmmmm. :D

Cost so far... NZ$300 for itb's and NZ$2,900 for the head and cam work (mates rates!)

My mate is doing the CNC machining, so I'll see if I can buy him out with beer. :D

Hey mate,

Nice work. Looking good.

I recently built an RB30DE using 25DE head from an R32 with a modified RB26 6 throttle inlet to fit. Throttle response is unbelievable! I find myself rolling off the power just so I can nail it again. Havent go mine fully tuned yet... Only tuned to 4000rpm. It currently makes 86kW at wheels at 3000rpm (10BTDC and a little rich) so I cant wait to unleash it!

Yours should be somthing along these lines too!! What compression did you end up with?

Again mate, awesome work!!

Cheers for the comments guys. I want to have it going for next season, so that's Novemberish.

Hopefully it sounds good, only 2ltrs though so hopefully I don't have to rev the rse off it to get the benifit out of the itb's.

SR20's sound like rse, I thought the world of rallying could do with the sweet RB sound :P (SR would be better for weight distribution)

Nosmo, what ecu and sensors are you running? I'm not sure of the compression, it's on a bit of paper somewhere. Kelfords were instructed to set the head up for the highest possible compression I can run on 98 octane. MSNZ is outlawing Avgas at the mo.

Edited by screamin'

ECU time...

What are your guys thoughts and experiances with Microtech LT12s ECU's?

A performance shop has recomended this to me and the price seems very fair, as long as it does what I want it to.

I need to read a Toyota TPS, aftermarket MAP sensor and do all the fuel and spark as per stanadard RB20.

http://www.microtechefi.com/microtech-prod...hp?product_id=5

Cool. Sounds like the LT12s comes with the MAP sensor going by what the supplier tells me, which will save me a few dollars. He's quoted NZ$1,650. Way cheaper that what I've been looking at previously.

That's why I'm a little bit sceptical.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...