Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Fired it up this morning.

(typical crap sound quality due to engine noise)

It's all untuned and just running on the start-up mode, hence the big lumpy idle. It wont take throttle yet, but at least it runs under it's own steam.

What ID are the toyota throttles?

42mm.

The tune on Thursday will just be a temporary measure, so that I am able to run the car at a test day on Monday to find all the problems before going to the final tune and dialing up the cams fully. Just want to be able to turn the wheels again, been a long couple of months.

I have to ask, with your choice of ECU, does the Link do a lookup comparison between MAP and TPS?

With ITB, you'll find that at different throttle positions, you get the same pressure behind the throttle body (Headed for the motor) but, you're actually getting different air, especially since you get a lot of air turbulence.

This is where you'll LOSE out on your throttle response, and get a drop in power, if it's not able to be tuned properly.

The Adaptronic which was mentioned earlier, does exactly this. The GTR doesn't have to worry about anything of the likes until you go MAP sensor on it. And then it sees the exact same issue.

Also to the person saying the Adaptronic runs unreliable drivers... I'd like to ask, SINCE WHEN?

Just a quick update. No pic's/vid's at the mo, haven't got time.

The car is up and running. Has much more torque, good throttle responce and sounds awsome!

Ran the car at two gravel hillclimbs on the weekend and found the extra torque very usable off the turns.

My mate is currently making some longer trumpets based off the info from the dyno run. This will mean we can dial in a wider power band from the cams and complete the tune. In the meantime I'm jut getting on with racing the thing again.

  • 1 month later...

I've done a few events with the ITB setup now and I have been very impressed with the results.

The car pulls much stronger in the mid-range, which is where I need it and it still rev's out easily to 8k. The throttle responce mid corner is instant and I am able to use more control when I'm looking for grip and there are no flatspots anywhere in the rev range from 3500rpm on.

The video below is of a steep hill we ran up a couple of weeks back. Compared to last year, I found it far more driveable and easier to keep momentium.

http://nz.youtube.com/watch?v=pjSTmw_WWqs

Still more tuning to be done, so hopefully with a few adjustments I'll have a wider powerband to play with.

picture001smlzy8.jpg

Edited by screamin'
  • 3 weeks later...

What power did it end up making and what torque?

Do you have a dyno graph?

Sounds really nice, good to see people doing something out of the mainstream and the engine bay looks really neat.

Don't have figures for the torques or ponies, wasn't too fussed about that and at the end of the day numbers don't mean much on gravel.

It has great midrange torque for a 2ltr and this makes the car far more drivable and controlable through the corners, when compared to the same events last year.

Why would itb's be illegal, unless you guys have some emission controls or something over there, which means in that case my SS is illegal too.

After the first event the engine bay is now really dusty, so it didn't look that good for long!

  • 4 months later...

Been running it for a while now. Car is going real good, had a couple of 1st in class (1600-2000cc) and a 1st two wheel drive on one hill climb. Good to be beating the Escorts and Tereno's.

Got a couple of short vid's of last weekends rallysprint. Day started off at -5°C and didn't get much warmer!

Some photo's. Check out the frozen road!

http://www.colourandlight.co.nz/galleries/...ne09/index.html

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes the gear for the R33/34 is different, it is red and has a different number of teeth. My part didn't come with that gear though, so I don't know how many teeth are on the red one. You'd have to reuse the 260RS/R33 gear, as long as it's not destroyed.   Haha, as unfortunate as that might be it was working fine for about the first 1500km I've had the car for now.
    • Update all   thanks to the workshop manual, it lead me back to checking fuses as mentioned central locking and door open lights worked when acc was switched on. diagram attached shows two points of power 1. ACC and 2.  Batt with the later being fused (#28) I did check the fuses using a multimeter but I must have stuffed that up also. Went back and checked the batt fuse in interior fuse box and you wouldn’t believe it… a blown fuse. replaced fuse and everything is now working as it should including the climate control   thank you all with your positive insight and knowledge.    
    • Where is the warning "That this thread is super old"   I just went into a 5 year old thread, went to do a reply, and couldn't see anywhere obvious a warning of it being super old
    • Duncan is correct. Pitwork (and Toyota's own cheap brand "Drive Joy") were primarily created as brands to sell other manufacturers car parts. It would be weird if Nissan sold parts for Toyota vehicles with a Nissan logo on it, so they created Pitwork to sell parts for other brans Toyota, Honda etc. They are not the same as Nissan genuine parts, although they *do* meet Nissan's standards for replacement parts. They aren't supposed to be a substitute for genuine parts, but a cheaper alternative that is better than Ebay fake parts from you-know-where.
    • Thanks GTSBoy, much easier to work with it now it's free!  
×
×
  • Create New...