Jump to content
SAU Community

Recommended Posts

I have just sent off for my cams level 2 [speed] and affiliate club license applications in the mail, but i want to know what I/car will need to do a track day at qld raceway for instance....

Obviously helmet and so forth, but do i need anything done to my car, like extinguisher, tow sticker etc... All help would be greatly appreciated and would like some info on which clubs hire the raceway out on the weekends as thats the only time i can get off work to play.

Your help would be great :D

Link to comment
https://www.sau.com.au/forums/topic/223078-track-day-ready/
Share on other sites

Yeah you'll need a fire extinguisher and perhaps a secondary bonnet restraint. And your cabin must be free of any loose items. Battery must be secure, etc.

Thanks mate,

Seems like its pretty relaxed then, i thought that there would be officials going over the car etc,

Any ideas on which clubs hire the qr out on a frequent basis??

Edited by Duncan1
Link to comment
https://www.sau.com.au/forums/topic/223078-track-day-ready/#findComment-3930105
Share on other sites

Sorry mate no idea ive never been to QR in my life. Im in Vic :thumbsup:

Yeah fair enough, sorry bout that, i didnt read your profile....

thanks for your help though.

Can anyone else offer any information about trackdays????? :D

Edited by Duncan1
Link to comment
https://www.sau.com.au/forums/topic/223078-track-day-ready/#findComment-3930116
Share on other sites

Don't forget the triangle positioned where your battery is :D

ok thanks,,,

so i need

1x fire extinguisher

1x triangle where the battery is

1x tow sticker, or 2 or none?

1x helmet

1x set of full length clothes?

and nothing moving arounds the car.

and a leve 2 cams license?

I there anything else i should know?

Link to comment
https://www.sau.com.au/forums/topic/223078-track-day-ready/#findComment-3930134
Share on other sites

If you just want to do timeattack days or saturday afternoon sprints you don't need a CAMS licence or any additional safety equipment, although a fire extinguisher would be a good idea.

Licence wise for the abovementioned days at QR you need an AASA licence which you can organise on the day at the track or beforehand via electronic comms.

Safety wise you will need a helmet, long pants and sleeves (preferably cotton) and for your vehicle to be in a roadworthy state

Link to comment
https://www.sau.com.au/forums/topic/223078-track-day-ready/#findComment-3930399
Share on other sites

If you just want to do timeattack days or saturday afternoon sprints you don't need a CAMS licence or any additional safety equipment, although a fire extinguisher would be a good idea.

Licence wise for the abovementioned days at QR you need an AASA licence which you can organise on the day at the track or beforehand via electronic comms.

Safety wise you will need a helmet, long pants and sleeves (preferably cotton) and for your vehicle to be in a roadworthy state

Thanks mate, appreciate your help.....hope to see you up there sometime.....

Link to comment
https://www.sau.com.au/forums/topic/223078-track-day-ready/#findComment-3931162
Share on other sites

+1 for www.timeattack.com.au

The next Track Day Paul (mountainrunner) is running is the Nissan Time Attach Meeting, on the 8th July @ QR.

Should be a great day. (more details in my sign below)

BTW, Paul just ran his 2nd Lakeside Track day yesterday. a little rain, but was great to see the old track back in use!!!

Duncan1, Hope to see you one of the events!

Cheers

Link to comment
https://www.sau.com.au/forums/topic/223078-track-day-ready/#findComment-3932337
Share on other sites

+1 for www.timeattack.com.au

The next Track Day Paul (mountainrunner) is running is the Nissan Time Attach Meeting, on the 8th July @ QR.

Should be a great day. (more details in my sign below)

BTW, Paul just ran his 2nd Lakeside Track day yesterday. a little rain, but was great to see the old track back in use!!!

Duncan1, Hope to see you one of the events!

Cheers

hehe i was there! :) was a nice rainy day..

i loved the 2x R32 GTR's :( the black one was hawt! and same with the other one..

Link to comment
https://www.sau.com.au/forums/topic/223078-track-day-ready/#findComment-3936898
Share on other sites

Well done on deciding on getting out there Ben. +1 for the Timeattack days. Also look at the weekend events run by QR as they aren't too bad and have a lot of fairly normal cars running.

As stated you need very little up here to get out on QR or Lakeside or even Morgan Park for example. We have a relatively strong contingent of racers in Qld that get out there regularly so don't be afraid to walk up and say hello.

The only other thing you really need out there is to limit your expectations and drive sensibly. Build your speed through the day and try not to outbrake yourself into any corners just yet. Ignore the laptimes of everyone else as well as any rubbish anyone else might pile on you for maybe being slower than drivers in lesser cars. It will happen, it has happened to everyone that has gone onto a racetrack. You are doing more by taking a steady day out there and learning then most of the latte sippers around the place who are Gran Turismo experts :banana:

So enjoy and feel free to ask any questions you want. There are no stupid ones unless they are the ones you don't ask.

Link to comment
https://www.sau.com.au/forums/topic/223078-track-day-ready/#findComment-3937464
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...