Jump to content
SAU Community

Recommended Posts

Hi guys,

I get a loud crunch for about 1-2 sec everytime i start the engine and also loud tapping sound (sounds like pistons) when i first start my car in the cold morning. Now if i was to warm the car up, take it for a drive then turn the engine off to start it back up again to look for the sound, the sounds gone away due to it being warmed up. Hence, why is the reason i can't take it to any mechanic to show the issue. :domokun:

Ive only noticed this loud crunch for 1-2 on cold start after ive changed my oil to 'Elf Synthetic Oil 10W50'. This is pretty much all the relevant information i can provide from my knowledge, and also that the sound is coming from under the hood on the passengers side, kinda sounds like its coming from the head area on the passengers side where the turbo is and all.

Could it be that im using a real thick oil, hence is why its making weird noises on cold start till its warmed up?

Note: The crunch sound is only for about 1-2 sec on cold start and not constant whilst idling in cold or driving.

Much appreciated for any helpful response.

Edited by R33Turbo
Link to comment
https://www.sau.com.au/forums/topic/223890-loud-crunch-on-cold-start/
Share on other sites

need a better decription of a "crunch" dude...

example

is it similar to some one standing on a aluminium coke can or like some one scrunching up a chippie packet,or someone crunching first gear??????? could be the starter motor drive not retracting quickly enough on start up cause the lithium grease on the shaft is cold and thick?? who knows.

Edited by nizmonut

actually it could more sound like short 'gear crunches' as well.

Basically, if the sound dies down after warm-up, it wouldn't be engine head related or anything severe right? So it wouldn't do any harm driving it around?

Edited by R33Turbo

i think you will find the rattle and the crunch will dissapear if you have rices for breakfast instead of cornflakes, a snap crackle n pop from the exhaust is usually a good sign of a nice flowing exhaust, however in this case drop the gluten from the crankcase and run some thinner oil as obviously what is in there isnt protecting the mechanically moving bits on startup.

yeah well im running 25w50 mobil 1 in my gtr and starts on the first cylinder to reach TDC, no knocks rattles, purrs beautifuly so yeah i guess so.

and dont be fooled by the advertising of "synthetic" a federal court ruling allowed the oil companys to label highly refined mineral oil as synthetic.... so you dont always get what you pay for. make sure its says 100% fully synthetic as apposed to

just synthetic

Edited by nizmonut
its not your starter motor sticking? is there actually a sound that continues on while the car is warming up?

Nope, as i mentioned above the the 'crunch' sound which sounds like 'gear crunch' is only to be heard for 1-2 sec after engine start then goes away. However, if i turn the engine back off and on to hear the sound again, it will still be there (when the car has not yet warmed up properly). If its been warmed up properly, you would not hear the sound regardless of how many times you turn the engine on and off repetitively, hence is why i cannot show the mechanic as i got to drive there with my car.

yeh id take a wild guess at starter motor also...

you could always leave the car with ur mechanic over night?? drop it off real late and get there early in the morn to watch them start it, so u know they aint taking it for a thrash...?

hence is why i cannot show the mechanic as i got to drive there with my car.
Leave the car overnight with the mechanic. That's the only way you will demo it to him.

nizmonut, you really using 25W50 oil? 25 is waaayyy too heavy, and 50 ain't much better.

PS - how about just having ONE thread on the problem.

Leave the car overnight with the mechanic. That's the only way you will demo it to him.

nizmonut, you really using 25W50 oil? 25 is waaayyy too heavy, and 50 ain't much better.

PS - how about just having ONE thread on the problem.

Im planning on doing that if i have time for it, however can't do it at the moment. Does that mean 10W50 is real heavy compared to average oils as well?

what do you mean by turn my a/c off? like disconnect the whole thing? cuz my a/c will obviously be off when im starting the engine in the 'cold morning'.
If you had your A/C on when you last turned off the engine, it will still be on when you go to re-start. Make sure you turn it off before actually cranking the engine.

10 is a bit heavy for starting (which is the only time it's important), but not too bad. Nissan's spec is 7.5W30 - you'd probably be slightly better using a 5W40.

oh alright, thanks for ur help there blind_elk... so ppl are suggesting it could be the 'start motor' dying out, maybe it could be... then again it could be cuz my oil is to thick for the weather these days if thats wat ur saying blind_elk...

i think i'd try thinner oil to see if it goes away....

If it was the 'starter motor', where is it? how much to repair or replace?

Edited by R33Turbo
If you had your A/C on when you last turned off the engine, it will still be on when you go to re-start. Make sure you turn it off before actually cranking the engine.

10 is a bit heavy for starting (which is the only time it's important), but not too bad. Nissan's spec is 7.5W30 - you'd probably be slightly better using a 5W40.

isnt nissans spec 7.5W40? maybe im wrong :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...