Jump to content
SAU Community

An R35 For Less Than $80k Aud Landed

rtune

By rtune,
in R35 GTR

 Share

Recommended Posts

rtune Experienced

rtune

Posted
Posted

http://www.prestigemotorsport.com.au/modul...hp?StockID=4647

btw.. Interesting what they say:

PLEASE DO NOT ASK ABOUT IMPORT FOR ROAD USE AS THIS MODEL WON'T BE ELIGIBLE TO BE ADDED TO THE SEVS LIST AS A SECOND HAND VEHICLE UNTIL 18 MONTHS AFTER FIRST RELEASE IN JAPAN (ie. APPROX. JUNE 2009), PROVIDING NISSAN DOES NOT IMPORT TO AUST. IN FULL VOLUME BEFORE THEN

So the R35s getting quietly listed cannot be complied until mid next year? if nissan are slow?

Link to comment
https://www.sau.com.au/forums/topic/224476-an-r35-for-less-than-80k-aud-landed/
Share on other sites
rtune Experienced

rtune

Posted
  • Author
Posted

but what don't get is the hints that there are R35s that can be for road use available or

soon to be available for nutty prices (160k), and there is one compliance shop so far that

has done the work to comply them.

But this advert says flatly that nothing can be done until 18 months after the japan

launch date. And if nissan import before mid next year nothing can be done at all, leaving

anyone buying one hoping to get a blue slip, in the lurch.

how to reconcile those two things?

NoFX_Hardcore Proficient

NoFX_Hardcore

Posted
Posted

That car has also been rear-ended... It's cheap, but personally if I had that sorta money I'd prefer to hunt down a straight one over a cheaper, crashed one.

We'll get the jap spec ones before aussie nissan gets them here I reckon.

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted
but what don't get is the hints that there are R35s that can be for road use available or

soon to be available for nutty prices (160k), and there is one compliance shop so far that

has done the work to comply them.

But this advert says flatly that nothing can be done until 18 months after the japan

launch date. And if nissan import before mid next year nothing can be done at all, leaving

anyone buying one hoping to get a blue slip, in the lurch.

how to reconcile those two things?

I think Prestige Motor Sport are just playing it safe, cause they know its a pretty thick Red Tape ATM with all the SEVS and what-not.

So if you can get a cheap one like this, repair it and get it to Road use then thats friggin sweet!

That car has also been rear-ended... It's cheap, but personally if I had that sorta money I'd prefer to hunt down a straight one over a cheaper, crashed one.

We'll get the jap spec ones before aussie nissan gets them here I reckon.

I would like to go for the V-Spec Model.

msuen Contributor

msuen

Posted
Posted

correct me if i'm wrong , but if you import a car for rally/race purposes it would never be able to be complied for road use. I though that to register a car it needs to be imported as a road car to begin with. If i'm wrong then this would be a bargain to buy .

regards

mike

Paragon Proficient

Paragon

Posted
Posted

The guys selling the GTRS for 160k are not selling them as second hand I believe but rather as limited numbers of brand newies. I dont think SEVS allows you to bring in damaged cars for road use anyway or even cars that have had accidents and repaired.

swanny180 Proficient

swanny180

Posted
Posted

Hahaha wouldn't buying a rear ended R35 just be a great idea...

That'll be an easy fix, just head straight on up to your local Nissan dealer and grab a few new R35 panels that they obviously dont have...

R32zilla Experienced

R32zilla

Posted
Posted

I have heard...so its just a rumour...that if you ask nissan for parts for your R35 (panels) outside Japan - they have the right to refuse supply.

Although I guess it wouldnt stop you using a supplier in Japan who would then whack on their %.

Cheap 35 though! nothing that gaffer tape couldnt fix!

  • 1 month later...
Drift Motorsport Community Regular

Drift Motorsport

Posted
Posted

Needs at new quarter, bever panel, rear bar, tail light and a skilled workshop to do it. You may get change out of 20k to fix it properly if you can get the parts.

quenda-xr Apprentice

quenda-xr

Posted
Posted
That car has also been rear-ended... It's cheap, but personally if I had that sorta money I'd prefer to hunt down a straight one over a cheaper, crashed one.

We'll get the jap spec ones before aussie nissan gets them here I reckon.

Any idea how much cheaper the import ones will be compared to the local ones? I can't afford the circa 150K price. lol

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • GTSBoy
      RB25 Drama's

      By GTSBoy · Posted

      Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • iain_ST44GA
      M35 Aftermarket Fuel Pump

      By iain_ST44GA · Posted

      also possibly backed up to my filler and shat down it! 🤣
    • Julsmadrid
      RB25 Drama's

      By Julsmadrid · Posted

      Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
    • soviet_merlin
      R32 GTST - 600KW+ RB28/CD009 Build

      By soviet_merlin · Posted

      What sold me on Trailer Park Boys is this scene: Great stuff, just stay clear from the new Netflix production.
×
×
  • Create New...