Jump to content
SAU Community

Recommended Posts

standard nissan filter will do the job great.

I use Cooper filters that the local parts store keeps in stock. I once read a comparison of "3rd party" filter brands that the Cooper filter did a bloody good job. See here:

http://www.aus-cartalk.com/auspoc/techstuff.htm

Remember that the manufacturer filters are usually just other brands with the car maker's name stamped on it instead. So you're relying on your car manufacturer to specify a filter that does a satisfactory job (comes down to a trust thing really!).

The cooper filter base plate looks just like my Nippon Micro base plate. I wonder if they are from the same manufacturer but different brand?

Mobil is a true PAO synthetic oil with added esters. Contains good levels of detergent and anti wear addatives.

Motormates also do the Purolator oil filters.

Mobil 1 does not have any esters :unsure: They use alkylated naphalines in its place now. Purolator Pure 1s are damn good filters for the money. I'd rather pay for a Pure One than get a free Ryco.

Links, the 8100 is a good oil. But if you can get the Mobil 1 0W40 at a similar price, then get it because it is superior.

But if you can get the Mobil 1 0W40 at a similar price, then get it because it is superior.

I disagree. Ran Mobil 1 in the pulsar and it went off very quickly, and before the service interval. It went from the high mark and light brown to the low mark and dark brown in the space of 2 weeks and an old pac run. My service interval was 5000km which should be very very conservative on a stock SSS.

Motul 8100 never used a drop on my RB20 over 5000km and came out still looking great.

I dislike oils that go off that quickly. Castrol Synth-R was also low on the dipstick after only 4000km on my RB20.

Stick with the Motul 8100. You can't go wrong.

An oil that goes dark is cleaning and suspending crap better than an oil that doesn't.

I'd much prefer my oil to go dark than stay light.

If its using oil... Then for the given motor its too thin, castrol 5w30 is too thin for my rb30det as it uses around 500-1000mls per 5000kms. throw a 40 weight in it and it doesn't use a drop.

Depends on the cars condition and how you drive.

Lots of short trips you are better off every 5000k.

Hows your fuel economy? Fuel economy is an indication if your dumping fuel in to the oil excessively.

To truley know you need to do a few oil analysis.

I disagree. Ran Mobil 1 in the pulsar and it went off very quickly, and before the service interval. It went from the high mark and light brown to the low mark and dark brown in the space of 2 weeks and an old pac run. My service interval was 5000km which should be very very conservative on a stock SSS.

Motul 8100 never used a drop on my RB20 over 5000km and came out still looking great.

I dislike oils that go off that quickly. Castrol Synth-R was also low on the dipstick after only 4000km on my RB20.

Stick with the Motul 8100. You can't go wrong.

You are comparing 2 different oils running in 2 different cars??

Mobil 1 0W40 is probably their best M1 range they offer here in Aust. It meets MB 229.5, where it is used in cars who's OCIs of 30,000ks+ are the norm. For it to go 'off' in under 5000km just by looking at it is just an assumption, especially with no oil analysis results. smile.gif Perhaps the thinness of the 0W40 promoted more oil consumption, same with the Castrol R 5W30.

I suggest you try comparing the OEM certs between Motul 8100 and M1 0W40 and you'll see which is superior.

Sir-D, Helix Ultra will do a 10,000km OCI comfortably on a stock motor, providing its in good condition.

An oil that goes dark is cleaning and suspending crap better than an oil that doesn't. I'd much prefer my oil to go dark than stay light.

If its using oil... Then for the given motor its too thin

Good to know and I agree with you on the first point too.

Just for reference I am using Mobil1 5W50 in my GTR and its not 'using' any at all.

Its also gone quite black since my February oil change.

Have to say that Shell Helix Ultra is performing pretty well in my car. Economy so far seems pretty good. Just got under half a tank of petrol and the car has done around 250 KM... car is auto.

Also the revs are smooth and no harsh noise.

SHU is consider kindda >_< over here due to it's sluggish performance and high cost for a group III oil.

Well busky2k i couldnt get the mobil or the motul as i went to supercrap and they dont stock it, i ended up buying the 0w40 castrol edge and a pure one filter. It should do the job.

Once again thanks for all your advice.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...