Jump to content
SAU Community

Recommended Posts

Is the small temperature difference experienced by a car in Brisbane or Melbourne going to make any significant difference when choosing an oil eg 10 40w or 20 -50 w in summer.

Temperature differences for Melb and Brisbane are quite large for humans between Melbourne and Brisbane.

How about the same question but throughout the whole year. Melbourne never gets to zero with Brisbane getting to around 4 degrees occasionally.

Cant be too poor if the Red Bull and Renault F1 team use it.

I don't know much about the Elf oils but rest assured the product used in those is vastly different to that sold to the public. Like King Springs on a V8 Supercar :blink:

Is the small temperature difference experienced by a car in Brisbane or Melbourne going to make any significant difference when choosing an oil eg 10 40w or 20 -50 w in summer.

Temperature differences for Melb and Brisbane are quite large for humans between Melbourne and Brisbane.

How about the same question but throughout the whole year. Melbourne never gets to zero with Brisbane getting to around 4 degrees occasionally.

Well Melbourne does reach 4-5 degrees regularly in the winter, and certain areas (mountains for example) do see zero degrees. But meh, I run 10w40 all year round and see no issue with it.

The old 20w50 in summer and 15w40 in winter adage wasn't so much to deal with extra heat in summer, but extra cold in winter as those older vehicles (when the saying came about) ran best with a 20w50 but this was a little too thick for cold starts.

ELF make very good oils. I have been using there products for ages and there fully synthetic range is only $50 for 5L. They make a fully synthetic 10W-50

I found it make my engine more quite and when i changed it every 5,000 is wasn't ever black.

skisII care to explain why feedback was negative and some proof to back it up as to why its poor? Cant be too poor if the Red Bull and Renault F1 team use it.

F1 engines are very different to road engines, as are the oils they use. Elf would certainly manufacture a specific oil for f1, and unless research has been banned, they'd be constantly changing the oil formula to tweak a little more life and power out of those 10k rpm monsters

ELF make very good oils. I have been using there products for ages and there fully synthetic range is only $50 for 5L. They make a fully synthetic 10W-50

I found it make my engine more quite and when i changed it every 5,000 is wasn't ever black.

skisII care to explain why feedback was negative and some proof to back it up as to why its poor? Cant be too poor if the Red Bull and Renault F1 team use it.

Hey mate,

The guys I heard from usually changed oil every 5000kms, after around 2-3000kms they reported their motors not running right. After an oil change it would be back to normal (all on sr20s) This is subjective feedback but from multiple people so as much as im against the whole touchy feely judgement of motor oil, when a bunch of guys report negatively....

Although those F1 teams advertise elf I would bet they dont use any off the shelf formulations so thats irrelevant.

F1 engines are very different to road engines, as are the oils they use. Elf would certainly manufacture a specific oil for f1, and unless research has been banned, they'd be constantly changing the oil formula to tweak a little more life and power out of those 10k rpm monsters

you mean 19k rpm right? :P

Hey mate,

The guys I heard from usually changed oil every 5000kms, after around 2-3000kms they reported their motors not running right. After an oil change it would be back to normal (all on sr20s) This is subjective feedback but from multiple people so as much as im against the whole touchy feely judgement of motor oil, when a bunch of guys report negatively....

Although those F1 teams advertise elf I would bet they dont use any off the shelf formulations so thats irrelevant.

Me and my mates used this oil in SR20s and never had one issue with it.

Me and my mates used this oil in SR20s and never had one issue with it.

Not doubting you. The fact that a group of your mates didnt have a problem and a group of my mates did perceive a problem is a perfect example of why I struggle with people saying 'this oil is good and that oil is bad' just going off their gut feeling which is most of the time all about what they have heard and how much they have paid.

I really doubt it, even if you ran a 25w-50 mineral oil in your skyline sure it would be ever so slightly more sluggish but it wouldn't be 'running not right' after 3000kms.

Yeah i doubt it too.. but your example of using a 25w-50 instead of a 5 or 10w 40 im pretty sure you would tell a difference on startup. a 25w will be massively thicker when cold than a synthetic 5 or 10w which prob = noisy motor when cold and relatively excessive wear until its at normal temp.

just going off their gut feeling which is most of the time all about what they have heard and how much they have paid.

exactly, end of the day I'm confident that even some of the cheaper oils will still provide good enough protection for my motor.

No matter how much you say you don't trust gut feeling rah rah - if you changed your oil over to one that felt crap or sounded noisey, I sincerely doubt you would go against your gut feeling that it isn't the right oil for your engine. And that's what it's about, driving is an experience...you don't want it to feel like shit. And when it comes down to it, instinct takes over. There's a reason your friends ditched the Elf oil, and rightly so. If you're not as in tune with your vehicle then I can only sympathise, as it is wonderful thing having that connection with your vehicle.

as it is wonderful thing having that connection with your vehicle.

No it's not. Mine drives me up the wall sometimes. I'm so in tune with the farken thing, that I pick changes in the vibrations I feel through my left foot as it sits on the rest while driving. I hear things that nobody else EVER can no matter how hard they try. I notice even the slightest difference in engine note, and even freak out when I start my car in the garage as the exhaust sound reverberates and resonates to make a slight knock sound when in the cabin idling.

Being one with your car is great, but it can also drive you insane if you're over-cautious like I am :)

for those with Ethanol concerns, i ran AMSoil 10w40 in my 34 when it was exclusively on E85, bout 18months. No milky issues etc - no UOA, but didn't seem to be any issues with it at all. And being a Yank oil i had more confidence in it being able to handle Ethanol.

I believe it is a Group IV/V blend - i got it from Harold at performancelub.com

for those with Ethanol concerns, i ran AMSoil 10w40 in my 34 when it was exclusively on E85, but 18months. No milky issues etc - no UOA, but didn't seem to be any issues with it at all. And being a Yank oil i had more confidence in it being able to handle Ethanol.

I believe it is a Group IV/V blend - i got it from Harold at performancelub.com

$$?

No it's not. Mine drives me up the wall sometimes. I'm so in tune with the farken thing, that I pick changes in the vibrations I feel through my left foot as it sits on the rest while driving. I hear things that nobody else EVER can no matter how hard they try. I notice even the slightest difference in engine note, and even freak out when I start my car in the garage as the exhaust sound reverberates and resonates to make a slight knock sound when in the cabin idling.

Being one with your car is great, but it can also drive you insane if you're over-cautious like I am :)

You have to own a Skyline to know of the paranoia, don't you? I can only explain it to other Skyline drivers lol. The only time I don't have the paranoia is when I'm thrashing the thing, then it's pure bliss...they seem to want to be driven hard. My mate has had enough of it and is selling his R34! But it can certainly be a good thing when you want to diagnose a problem, or when you want to maintain control over everything it is doing.

I bet you listen to the way your car starts to see if it starts with perfect timing or whether it struggles at all :)

Birds my man, you have NO idea. That's barely even the beginning :P

The start is the MAIN part

But yes, I agree. You have to drive them hard :) It just feels like a heap of shit when I'm driving it soft (like cold start etc)

And that's what it's about, driving is an experience...you don't want it to feel like shit. A

Sure if it makes you not enjoy the car then don't use it, doesn't mean it is a bad oil or that people shouldn't use it though. Scientists don't ever base results on a vibe.

Edited by Rolls
Sure if it makes you not enjoy the car then don't use it, doesn't mean it is a bad oil or that people shouldn't use it though. Scientists don't ever base results on a vibe.

They do however base it on profit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
    • OK, so a bunch of trim needs to come off to get to the rear shock top mounts. Once the seat is out of the way, the plastic trim needs to come off. Remove 2 clips at the top then slide the trim towards the centre of the car to clear the lower clip Next you need to be able to lift the parcel shelf, which means you need to remove the mid dark trim around the door, and then the upper light trim above the parcel shelf. The mid trim has a clip in the middle to remove first, then lift the lowest trim off the top of the mid trim (unclips). At the top there is a hidden clip on the inner side to release first by pulling inwards, then the main clip releases by pulling the top towards the front of the car. The door seal comes off with the trim, just put them aside. The the lighter upper trim, this is easy to break to top clips so take it carefully. There is a hidden clip towards the bottom and another in the middle to release first by pulling inwards. Once they are out, there are 3 clips along the rear windscreen side of the panel that are hard to get under. This is what the rear of the panel looks like to assist:
×
×
  • Create New...