How Many Kws

[Adz2332]

Hey all getting my R33 GTR tuned up today.. hopefully back today... But im dying to know how many kws it will get roughly... Its killing me not knowing!! lol... I was hoping id get 300kws, but have i done enough.

Mods

- PODS

- FMIC

- Power FC & Controller

- Sard 700cc Injectors

- Nismo Fuel Pump

- N1 Steel Wheel Turbos

- Greddy Profec 2 Boost Controller

- exhaust - Just fap front pipe, highflow metal cat and cat back Kakimoto Regu 06&R.

- Tomei Cam gears

What do u think

I will post up the dyno graph as soon as i know....

Edited June 20, 2008 by Adz2332

[Guilt-Toy]

depends on what boost level, 300kw should be doable

[NYTSKY]

275awkw

[Adz2332]

IF it doesnt get 300kws i wont stop till i have it. but where to from here though if it comes back at 275kws or so??

[Kranker]

May want to think about pistons and rods soon, but im a bit soft, and a fan of overkill when it comes to engine building.

People have made 300+ with standard bottom ends.

Keep screwing boost in, N1 turbos should make 300rwkw, if not, you might need 2860-7's or GT-SS's, but this along with internals starts to get expensive.

Oh, and i hope uve got some mods to the oil stystem, restricter etc.

Good luck mate, even if it only makes 275 uve still got one hell of a quick street car on your hands.

[GeeTR]

IF it doesnt get 300kws i wont stop till i have it. but where to from here though if it comes back at 275kws or so??

Ask the tuner to move the dyno intake temp sensor and be happy with N1 response and poowah

May want to think about pistons and rods soon, but im a bit soft...

Kranker, you suggesting a motor rebuild for a 300rwkw BCNR33 RB26, that is soft

Edited June 20, 2008 by GeeTR

[R31Nismoid]

Which N1s?

R34 - 330rwrw

R33/R32 - 300 or a bit less (unless they are the .64 R32 N1s)

[Adz2332]

wont know till monday now... and the turbos im not sure will also know that monday.

The car had 227kws at the wheels before the power fc, boost controller, injectors, fuel pmp and cam gears were added

[nizmonut]

block work, its always the block work. good luck with your goal, and lay off the takeaways cause you gonna need the money lol.

[Adz2332]

Will it only made 260awkws something on 1 bar.....

havent driven it yet but i am a bit disapointed.....

[Elithrar]

The car had 227kws at the wheels before the power fc, boost controller, injectors, fuel pmp and cam gears were added

Those mods won't add a magical 70rwkW - N1's are fairly small turbos and you will only get so much out of them. I'd be looking to upgrade those as the next thing on the list, with a re-tune & potentially a cam upgrade too.

[Adz2332]

Yer i guess. ill drive it and see what i think... give it awhile... save some cash and ill see what happens

[Adz2332]

260.9kws

[R31Nismoid]

260rwkw + 1bar, sounds perfect to me. Mine was 250rwkw @ 1bar (stock cat) and GT-SS, so near enough to your setup for all intents and purposes

You need to be running 20-24psi to see over 300rwkw, so thats why your disappointed, you'll never get 300rwkw with small boost on small turbos

[Adz2332]

The tuner said it was SAFE safe.. has he gone TOO safe?

[R31Nismoid]

I dunno, you tell me?

Your the one wanting the numbers remember

You could safely lean on it to 280-300rwkw without much of a worry with 18psi or so. Would be pretty snappy and safe as its not pushing too hard.

Maybe there is a reason its safe? Too many unknowns here overall really.

[Tomek]

260 on 1 bar is still pretty impressive.. N1 are most efficient/ flowed at 18-20? Which Nismoid said would net approximately 300, I agree

[Cubes]

More boost don't be weak.

On the same dyno with GT2510's a bloke I know made 263rwkw at 1bar also.