Jump to content
SAU Community

Recommended Posts

Oh hai. Read me. Bit of a long story but meh...

Coming home from work tonight at about 10pm, turning onto Great Eastern Hwy from Burswood Drive. (This is the road just down from Burswood traino by the way) I am behind one other car as we come to the give-way sign. At this time I look towards traffic, and notice that we will have to stop & wait, but I also noticed a man running. As I just come to a stop, I hear a big bang & a hand smack my drivers side window. Apart from the holy f**k, not sure what else was going through my head apart from "he just ran straight into my f**king car!" I notice this guy is now on the ground, so I put the window down & ask if he's okay.

To put it nicely, I noticed he was a coloured individual whose decision making would be currently impaired due to un-natural substances being previously consumed.... He pulls himself up & staggers a bit, and then asks if he can "get a lift to the other side of the road where those traffic lights are". At this point the alarm bells were going off because he was running the opposite way to where he apparently wanted to go.

Told him I couldn't because I could only turn one way, but then he walked around the front of my car to the other side. I'd already locked the doors so he couldn't get in, but put my window down a little bit so I could tell him that I couldn't, just as another car came up behind me. He then put his arm into my car & tried to unlock it, but couldn't find where. Just as I was about to tell him to f**k off & was going to take off, I see someone has dragged him away from my window, and then I seen it was cops that were in the car that had come behind me!!! It wasn't a marked car, it was a toyota I think so that's why I didn't think they would be cops. They pulled him away first & then he was on the front quarter panel, then to get him off my car they pulled him & put him to the ground.

Even as he was being dragged away he twice asked if I was gonna give him a lift, once as he was being pulled away & again when one cop had him on his stomach.... :( I don't know if it was just chance that it was a cops in the car that was the first car there, or they happened to be at the traino & see him run into my car & then drove down, but at that point I was pretty thankful to see them, because it meant I didn't have to drive off with someone hanging off my window or have to smack this bastard in the head a few times.

Cop asked me just to check my car for damage after I said he ran into it, but couldn't see any so didn't need to give my details. A few transit guards had also come down towards the end, but at that point I was just spun out over what happened over about this minute & a half so was sort of in shock, am thinking now that I probably should have given my details in case when I look tomorrow in the light if there was any damage but I don't think there will be. Not quite the same as mattyp's thread from a couple of months back but it's sure one of those situations that spin you out.

ok stop reading now k thnx :)

Edited by ossie_21
Link to comment
https://www.sau.com.au/forums/topic/225407-the-had-to-be-there-thread/
Share on other sites

Yeah the car was undamaged thankfully :( Thing about that though is that until last night by car was a bit dirty, and you could actually see the finger marks running down the door from when he was falling :P

  • 2 months later...

Back with v2....

Same deal, leaving work tunnel-bound on the Farmer Fwy about an hour ago.... Not many cars on the road, & just after the exit to East Perth it becomes 2 lanes. Nothing behind me, in the left lane with 2 cars in front of me. These cars are going about 70, so naturally I decide to overtake them. Just as I checked the blind spot & I'd noticed a blue shirt running next to the wall separating directions on the freeway but on the other side, and thought it must have been a cop. Did the check, indicated & began moving over.

At the point where I'm half in each lane I notice an olive-skinned man has jumped the barrier & already started running across the freeway. No-one was in the right lane so it made sense (in a weird sort of way :) ), but I was changing lanes so I'm met with a guy standing in the middle of the lane with his arms out hoping like f**k I wasn't going to mow him down.

I was straight onto the brakes, slowed down to about 40/50 I imagine in a very short time & distance, and managed to get between him & the wall. Now if this cop was right behind him it would have been him being hit, but he was just jumping the wall at this time. In my rear view he kept chasing him & I seen a cop car had a car pulled over on the down ramp towards the tunnel, I'd guess it started from there but must have been a good chase, the cop was quite tall & strong looking but not a quick runner, plus the guy running was carrying a couple of things while he was being chased haha, a big & some sort of stick/piece of wood. Rarely a boring drive home for me these days :thumbsup:



  • Similar Content

  • Latest Posts

    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
×
×
  • Create New...