Jump to content
SAU Community

Recommended Posts

huge night, stripped much of the lancer down tonight. i reckon a full day and it will be ready to head off to the soda blaster!

plan is to offer it as a lease car for targa wrest point and targa tas.

sorry about the crapberry pics...

engine is ready to come out... anyone want lancer gsr parts!

post-5400-1225941186_thumb.jpg post-5400-1225941199_thumb.jpg post-5400-1225941209_thumb.jpg

evo 3 has a little bit of surface rust around the spare wheel well but thats about it. the gsr doesn't have any which is good.

Edited by t01-100

Well I had my 1st practise with James yesterday up at Lake Mountain. Just low speeds in his little Audi A3 but just to get used to listening to someone call notes and also to try and get a better feel for what each size corner actually means (were using the 1-6 scale notes).

I must say it will take sometime to get used to actually listen to whats being said. When it gets real busy I found I zoned out and just concentrated on driving rather than listening - not sure if thats a common thing or not. I was also suprised at how slow a "4" corner is. I think I expected a 4 to be more like what a 4+ or 5 minus is so it was good to get some better understanding on how it all works. But it was a fun bit of road and I can see why it'd be a popular event. Was also funny how the drive up calling notes seemed to take 1/3 of the time of what coming back down did!

Next up we'll go and takle Mt Buller for some more practise. But we should have it licked by the time we get to Tassie :ninja:

The numbers just refer to the angle of the corner which if you look at a pic is basically replicated by this:

1226-pace-notes-graphic1.jpg

The funny thing is that it doesn't necessarily totally relate to the speed of the corner. Depending on the size of the road / exit or more importantly the length of the corner - it is possible for a 3 corner to be faster than a 4 corner for example (although not normally).

But many 4 cornners (at least at Lake Mountain) were quite long so were really quite slow.

Actually Nick if you are interested this is an example of what seem to be some popular notes using the 6-1 scale, as the ones we used on the weekend were similar to this (were Jeff Beaumonts personal notes). As you can see at first glance its pretty full on and it'll take me and James a few goes to fully understand exactly whats written in terms of real world data.

http://tarmacchallenge.com.au/PDFlibrary/2...20VMS_Notes.pdf

... and I can also send you the Vandenberg notes corresponding to the stages.

i suggest don't try and disect the where or why's this early on mate, just watch heaps on in-car and practice practice, it'll become second nature.

As I told Giant, you'll never want to drive anywhere without ya missus calling notes for you, and he totally agrees :D

I'd hate to use someone else's notes. can you do your own pacenoting?

I had a simple system when I started in forest rallying. put a bit of tape around the top of the steering wheel, and make a cardboard cut out to sit behind the wheel with your numbering system on the back - for the above 6 to 1 system, you'd put 6 at 11 and 1 o'clock, 5 at 10 and 2, 4 at 9 and 3, and so on. that would get you to 1 by 6 o'clock. This gives you an indication of the speed of the corner rather than just its angle on paper, because a more open 90degree turn will require less steering lock than a tigher slower 90 degree turn. You really need minimum of 2 passes over the stage - one to note, and the second to check and alter where appropriate. obviously you add your own extra information like + or -, opens, cut, cautions etc. And that's it - pacenoting for dummies. That's how I started, but then again i did roll the car...

Doing your own notes isn't hard but most of us are time poor trying to earn the 20 grand thats needed to do Targa!

Therefore, it makes perfect sense to use a trustworthy notes source such as Vandenbergs, Rally Notes, whatever, AS LONG AS YOU MAKE THE TIME TO CHECK THEM!

So, I half agree Harry, but I'd never use unchecked notes.

Buying good notes saves about half the time of writing your own, and of course you can modify them however you like to suit your particulat style.

I've never had the time (well money same thing) to do my own notes. we only found 1 mistake in the vanderburg notes the year i did it. Kel found no mistakes this year or at TTC.

its pretty different with a fully closed road on semi slicks too. as a starter 2 = 2nd, 3=3rd, 4=4th, 5 and 6 is as fast as you can lol. its not that simple but it was a good guide to start with.

as a starter 2 = 2nd, 3=3rd, 4=4th, 5 and 6 is as fast as you can lol. its not that simple but it was a good guide to start with.

The funny thing is though for Lake Mountain in the little street tyred 1.8T Audi A3 we got into 3rd gear after the second corner and stayed in it for pretty much the entire run up the hill! lol

I can actually see quite a lot of single gear stuff being done in these kind of events. Although I think if you had a flappy paddle you may choose to change more frequently than you would with a standard manual. (Oh but apparently standard manuals are so much better!!!)

obviously Targa Tas would be a huge effort to note yourself or even check a set of purchased notes. If I ever did it I'd buy notes, but I think I'd treat it as a blind rally. I just couldn't trust someone else's notes that much. For short events like Lake Mountain and Mt Buller I'd definitely do my own notes.

obviously Targa Tas would be a huge effort to note yourself or even check a set of purchased notes. If I ever did it I'd buy notes, but I think I'd treat it as a blind rally. I just couldn't trust someone else's notes that much. For short events like Lake Mountain and Mt Buller I'd definitely do my own notes.

Hahahaha, no you wouldn't Harry. I know you, and you wouldn't like coming 200th mate :P

FYI, Doing an entire note check including running over some stages, two, three, or even four times can be done in four to five long days.

The numbers just refer to the angle of the corner which if you look at a pic is basically replicated by this:

1226-pace-notes-graphic1.jpg

The funny thing is that it doesn't necessarily totally relate to the speed of the corner. Depending on the size of the road / exit or more importantly the length of the corner - it is possible for a 3 corner to be faster than a 4 corner for example (although not normally).

But many 4 cornners (at least at Lake Mountain) were quite long so were really quite slow.

Actually Nick if you are interested this is an example of what seem to be some popular notes using the 6-1 scale, as the ones we used on the weekend were similar to this (were Jeff Beaumonts personal notes). As you can see at first glance its pretty full on and it'll take me and James a few goes to fully understand exactly whats written in terms of real world data.

http://tarmacchallenge.com.au/PDFlibrary/2...20VMS_Notes.pdf

thanks Snowy that explains a lot... your a brave man, as much as I would love to do it one day, tarmac rallying scares the crap outta me! we took the long way back from Warnambool after the long weekend and I really like attacking the slower sharper corners but I would imagine pushing big speeds through the fast sweepers would be terrifying... good luck with all the prep

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...