Jump to content
SAU Community

Recommended Posts

Yeah exactly.... I remember the first time appo and I walked in there at our first, we just stood and looked for at least half an hour..... we may have had a little tear too. Ok, and maybe held hands for a bit.

It's like a car show, but like no other, as there's 300 odd cars beautifully built and prepped for six days of racing, not just looking pretty.

Edited by Marlin

Its in the newsletter

"One thing that will be missing this year unfortunately is the Silverdome expo. Due to the large fields we

just will not have the room to set up the stadium safely to allow the public in and meet local government

regulations".

Unless I have just read it wrong and they just aren't letting Joe Public in to look?

Yeah the cars are still at the Silverdome each night, but we're just not doing a public night... instead presenting awards at George Town post stage (Tuesday) so people can check them out, the Devonport Town Stage and also at Targa Fest on Friday night in Launceston City.

The main reason for this is obviously the massive crowds that will demand to see my RX-7 and they will simply tear apart any dirty old Evo, STi or Skyline in the inevitable unruly rush!!

Excellent! Which cars?

Definitely Geoff's Fiat and the Skyline is not confirmed yet.

414 Late Classic Geoff Thomas Colin Bray 1971 FIAT 124 Sport

820 Early Modern Carey Fraser Dean McLardy 1998 Nissan Skyline GTt

Yeah the cars are still at the Silverdome each night, but we're just not doing a public night... instead presenting awards at George Town post stage (Tuesday) so people can check them out, the Devonport Town Stage and also at Targa Fest on Friday night in Launceston City.

The main reason for this is obviously the massive crowds that will demand to see my RX-7 and they will simply tear apart any dirty old Evo, STi or Skyline in the inevitable unruly rush!!

Who's running your RX7?

A couple of guys from Canada (one is a well known jurno over there). They ran the event back in 2001 and have been keen to get back but put off by the spend getting a car out from there, so leasing this car was a much more cost effective option and pretty safe considering the car is pretty much all new or rebuilt.

It's nearly finished, waiting on the rear shocks to come back from being revalved and it's going back to the North West coast tomorrow for final Motec install now it's run in.

Well I completed my final shakedown on the weekend and can say this new car is finally pretty good. We found last week a cracked turbo intake pipe which obviously hasn't been helping! No idea how long that had been there because it hadn't been on a dyno since it was first built. We also have finally got the handling balance right so lets bring on Targa!

Less than a month to go!

:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...