Jump to content
SAU Community

Recommended Posts

well its the last upgrade i can c my self gettin power out of, cams are done its been bored out computer turbo blaH blah blah i think the plenum is the best way to go if i can gain 30more kw @ the wheels that will definatly get me over the 300rwkw mark

I would mate. If ya have done everything else that there is to do, then fire away. Dont worry about everyone else who says not to, try it yourself. LOL - then we'll all be asking u the questions about it all!

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I keep coming back to this mod as well. Its pretty big money, but woudl be money well spent if it fattens up the mid range. Though by the times its installed and car tuned its a $2500 exercise so would need to be pretty sure it works....anyone willing to take the plunge on an RB20?

LOL, people referring to results on RB25s doesnt do anything for my confidence :D

I'm keen to do one... and if money and time permits i'll try and do a before and after dyno run. At least you'd think there'd be some gains in response due to removing a metre or so of intake piping? :D

I don't see how a forward facing plenum can starve cylinders 5 & 6 of air. It might starve cyl.1 and maybe cyl.2 but cyl. 5 & 6 would get more air if anything, causing them to run slightly leaner and I believe that is the issue some people have with forward facing plenums, leaner rear cylinders.

spot on ash... you get used to power upgrades so quickly!

so your agreeing with him.. than why the f**k do we bother modifying cars.. saying something like that is absolutely stupid. if everyone took that attitude we'd all be driving dead stock slow shitbox's. when someones chasing hp offer them advice. instead of telling them mods are useless cause you'll be use to them with in a week of them being installed..

if i had of known that i wouldnt of modded at all.....

lets just sell our cars and buy push bikes.. we'll be use to them after a week apprently..

Hi mate,

did u have an after market ecu or just the remapped stock ecu?

anyone know if we need any computer upgrade to work with this front facing plenum?

cheers

no u dont need a aftermarket ecu or remap to run the plenum. i installed my one and working fine for a month b4 i went and got a remap+tune. just the idle was abit off thats all. also keep in mine that the piping goes where the battery is so u will have to put the battery in the boot. about 6hrs of work if u dont have ur misses in ur ear all day :D

no u dont need a aftermarket ecu or remap to run the plenum. i installed my one and working fine for a month b4 i went and got a remap+tune. just the idle was abit off thats all. also keep in mine that the piping goes where the battery is so u will have to put the battery in the boot. about 6hrs of work if u dont have ur misses in ur ear all day :D

I feel you man!

i was looking at the greddy plenums but as mentioned the 5th and 6th cylinder dont get enough air so i opted to pay the extra 200 bucks for the plazmaman plenum, she works well and i think it helped reduce lag from my to4e but that might just be me.

I got one on the 25, even if it doesnt give you any performance gains, the fact it makes your engine bay go from looking like ass to looking sexy as hell is worth the money. I cannot stand the standard RB20 and RB25 plenums, look like absolute sh*t!. Also makes working on your car so much easier because you dont have a million things in the way. If you can afford one and want one, get one.

  • 2 weeks later...
  • 6 months later...
well i have one on my R32 and i think its a good upgrade. i gained 30kw after i have my tune to get it running right. i say if u got the money go for it. but other people will say spend ur money on other things. have a look at my dyno sheet attached

cheers

bill

Well history repeats. I am back here again and again thinking about throwing one of these onto my car. So as a before and after mod you are comfortable that there was a gain from the manifold, and not from the tuning after the manifold went on...ie Dr Drift had tuned the thing optimally before the manifold went on??? Going from the TD06-20G to a TD06-25 i am going ot need to do some work to get the old girl responsive.

So torn between a Plazmaman setup or an EFI Hardware multi throttle setup

what power you making now? as too before?

ive got one on mine but never checked for gains before and after

i just went the whole hog when i blew the sh?t out of my engine 2 years back

never really noticed results as the car was off the road for 18 months

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...