Jump to content
SAU Community

Recommended Posts

Considering getting a front bar on my series 1 R33, but I'm wondering if its really worth it.

Possible problems I could foresee;

1. Forgetting its there and smashing it on something when parking.

2. Grinding it on various drive ways, etc.

3. Added harassment from cops, and hoons.

Mainly I'm concerned I'll damage it. Has anyone had any experience with this?

Also, how does a front bar look on a stock R33? Does it look silly without skirts and a rear bar?

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/228781-front-bars-are-they-worth-it/
Share on other sites

well it adds more character to the car!

but the downside is you gotta learn what you can make without smashing the front bar and what angle you need to take.

mines pretty smashed up now so i dont really care when it scrapes

yeah everyone baby's their new kit...just like a new mobile phone. Then u drop it for the first time...cringe...then eventually after a while, you won't care...If cops and damage are your only concern...then just get it...

Hiya,

You'll appreciate its looks when you get a front lip. If you want it look stock, you may be able to land one with a Nismo shape from www.jsai.com.au

It doesn't look at all out of place without skirts and rear pods.

In regard to damaging it, you'll be immediately conscious that it's there as soon as have it put on so...

i) you'll be aware enough to go over gutters at an angle

ii) you'll be aware enough to reverse into spots where there's a concrete stopper

iii) you'll learn where there are dodgy culverts to avoid as you drive from place to place and lastly,

iv) by avoiding the above, it'll prove that you're sober at the time eh? lol

Later on, you can buy skirts if need be...

Cheers, T

Depending on the aggressiveness of the front bar and its height will determine if it looks out of place with the factory side skirts and rear bar.

Learning to drive with a bodykit, as people have mentioned, will take time but it will also give your car a unique look and completely different stance.

1. Forgetting its there and smashing it on something when parking.

2. Grinding it on various drive ways, etc.

3. Added harassment from cops, and hoons.

Been through all of these, lol. Had problems for first 2 weeks of driving with bodykit... accidentally smashed it on a carpark and fixing and respraying it costed $350 :/ ... After that so far so good. Just make sure your suspension has stock ride height and you should be alright. Dont go too low, otherwise you'll have too many problems at dips and driveways. And dont worry if you occasionally scratch bottom of the front bar... noone will see it and soon or later you'd get stonechips etc. on the bottom anyway.

Edited by Rocky88

Thanks for the info guys.

I had another question, approximately how much does it cost to paint a front bar (or skirts, and rear for that matter)?

I'm pretty sure I could fit it myself, or at least with the help of a couple of mates, but I tried searching and couldn't get a price on exactly how much preparing plus painting costs.

Thanks again.

I would not recommend fitting it yourself, depending on where you buy the bodykit from there could be a bit of work involved with making it sit well. Best to pay the professionals and get the job done right.

I had a Fibreglass (as is most kits) Evo front bar on my lancer (Before the Skyline).

Made a big difference to the look of the car. (My opinion for the positive). Drew a bit more attention but nothing drastic. However. It made the car feel a lot more Fragile. Especially when you start seeing minor cracks form around the major mounting points. Then when i roadworthyed the car to sell it. They said they wouldnt give me a roadroady with a fibreglass bumper due to impact resistance. On a positive the front bar arrived and fit the car perfectly which was good.

Ill never change the front bar on my line. I am considering a Carbon Lip + Diffuser to go under my standard S2 bar. But I would never buy a cheap f/g replacement anymore.

So does no one have an average cost of preparing and painting, and fitting?

I'm really considering getting one, but don't want to find out a few hundred down the track that paint and installation cost a lot more than expected.

Prep/paint/clear/fit a bar with no extra problems may cost between $350-$600. Ask for Speedy Clips rather than bolts if appropriate so that you can get the bar off again yourself without hassles ie. to change a bulb, source a leak, to get at this or that...

Cheers, T

I had an M-sports front bar on my 33 for 6 or so months until my girlfriend put it into a lump of dirt on a mate lawn and cracked it :down:

Its now on my mates car all stiched up with cable ties (drift spec).

Heres a pic of it on mine VVVVVVV, price was $400 for the bar and $350 for paint.

post-43220-1217079315_thumb.jpg

i've prob got 7-8cm clearance up front :worship: you get use to it...

This is not a legal issue in Vic... it's the BODY of the car (including exhaust) which can't be lower than 100mm... side skirts/body kit can be lower...

i also have a plastic front bumper, not FG, this gives you a lot more flex, and i surely would have snapped it quite a few times otherwise... it's more expensive but it's save me what... 2 resprays at say $800 all up? something to think about

if you drive a lot of the same roads, and go to the same car parks, etc... that it's easy to manage because you know what clearances you have and don't have. I dread new car parks. I tried getting into the Melb Central car park from lonsdale st (under the walkway) in heavy traffic... and i couldn't f*cking get up the ramp!

So if you drive pretty much the same places, a low front bumper can be managed...

yes they are worth it! get one! or two or three! i've had four in my time of driving my r33 series 1 and i've loved every single one of them - especially my most recent custom made :worship:

that's it, get one! don't worry about the price just shop around and dont get anybody dodgy!

This is not a legal issue in Vic... it's the BODY of the car (including exhaust) which can't be lower than 100mm... side skirts/body kit can be lower...

can you show mw vic roads docs stating this? :worship:

hahaha, this is what Traction Tyres told me, and i thought if anyone is to know, they would (they run a tool under the whole car to check clearances) And i asked about the front bumper, and they're like, don't worry, it's just the body of the car.

i'm more than welcome to be proven wrong though, cos i'd like to know if my car is infact illegal... i've been pulled over a few times recently, all officers checking the front of the car, nothing said yet :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • New CAS just turned up from NZ Wiring. Looks like a nice bit of gear.  So, yeah. Triggered, bro. Realised I may as well do the cam belt while mucking about with it so will order one of them.
    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
×
×
  • Create New...