Jump to content
SAU Community

Recommended Posts

  • Replies 144
  • Created
  • Last Reply

Top Posters In This Topic

am looking for the plastic thingy in the middle that goes around the deck/aircon control etc.

how much ? and where can i pick it up if not how much postage to syd 2165..

ohh and do you still have the intercooler ? :)

Omg! now a million dollar question which I forgot to ask.....is it the same asd the R32 GTR one..if it I will take it..

From all the pics i have seen it is. The reservoir is different but the lid looks to be common between the 2

am looking for the plastic thingy in the middle that goes around the deck/aircon control etc.

how much ? and where can i pick it up if not how much postage to syd 2165..

ohh and do you still have the intercooler ? :)

Hi mate,

I have a panel glued to the back of the surround with gauges mounted and will have to see if i can remove it without damage.

Oil cooler sold

GTSt indicators sold

I am removing the engine tomorrow, i started and videoed the engine today prior to removal so if anyone is interested in the engine i can get a copy of the vid over. The car ran for about a minute before being shut off and idled surprisingly well considering the hole in the intercooler end tank which we found later.

I also carried out a compression test about 5 minutes after taking the video

1) 150psi

2) 152psi

3) 151psi

4) 150psi

5) 150psi

6) 150psi

I was pretty surprised by the results as i have never tested an engine with such consistent compression.

So splitfires and injectors are now available

engine and box are now out of the car.

Passenger side caster rod was found to have a slight bend as seen in the attached photo so price is reduced to $75. It's probably still usable, the threads are fine, ball joints fine so if anyone wants to have a punt, $75 firm or i keep em for bits.

post-2863-1217150516_thumb.jpg

Also pics of some of the other bits i am getting questions about.

post-2863-1217150798_thumb.jpgpost-2863-1217150821_thumb.jpg

post-2863-1217150854_thumb.jpgpost-2863-1217150878_thumb.jpg

post-2863-1217150919_thumb.jpgpost-2863-1217151121_thumb.jpg

post-2863-1217151220_thumb.jpg

gear box cross member was found to be bent. Now separating the box, tailshaft and modded speedo drive

rb25det box $1350

1 piece custom Hardy Spicer tailshaft $350

gtr speedo drive with r33 gear $50

I also have a brand new navara speedo drive i think it still has the original gear on it $50 as well.

gear box cross member was found to be bent. Now separating the box, tailshaft and modded speedo drive

rb25det box $1350

1 piece custom Hardy Spicer tailshaft $350

gtr speedo drive with r33 gear $50

I also have a brand new navara speedo drive i think it still has the original gear on it $50 as well.

Hey mate,

Speedo drive SOLD

Check your PM

Cheers.

i have a stock one but it is far from good. I'm keeping my aftermarket one on the off chance i buy a new car that it suits.

If you need it anyway send me a pm and we can talk price.

now separating the cams, cam gear and engine. I'll remove them from the engine this weekend and reinstall stock cams and cam gear

so early hks rb25det cams 256 8.8/264 9.0 $650. If i find i have a spare stock exhaust wheel i'll chuck in the adjustable one at that price

s1 rb25, no coils, no turbo and a set of stock injectors and a rail. sump has a dent in it where it hit the sway bar but can provide a spare, runs well, good compression $1350

Edited by BHDave

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...