Jump to content
SAU Community

Recommended Posts

  • Replies 90
  • Created
  • Last Reply

Top Posters In This Topic

wooahhhh thats insane man. what gear does it finish 400m in ?

lol! You certainly would if i was riding it, i can only manage mid 11's. The thing is capable of 9's if you have the balls to do it though!
hehehee cool mate.. ive never tuned a car in Europe by remote controlling the laptop in the car over a mobile phone connection. It will be interesting! I am looking forward to it :huh: Our test run last night worked smoothly so it should work fine.

To the race track you go :)

I took a screen shot from our little test run.

post-1240-1216864150_thumb.jpg

I was a big street racer back in the day, i used to be known for my launch abilities being able to out launch WRX's in my skyline (Poor clutch) but that was a long time ago and have grown up a bit since then :)

I have had about a total of 10 runs on the track, 2 back in 2001 in my old fj20 datto and 3 years ago i had about 4 runs in my skyline with 200hp less at the wheels, and the 3 runs i have had last weekend.

So i am not experienced on the track, the drag radials would not turn, i even had the launch controll spooling 3psi off boost on the line at 5500 rpm and droped the clutch and it would STILL BOG DOWN!!!!

If i had of had another go i would have dropped it at 6500rpm :) and i might have got a 10 but i broke out :blink:

Mate first i dont wanna belive that and was looking at monitor with wide open eyes :) tuning remotly hehe :))

Regarding you drag what tires you were using or do you often make runs on 400 meter because changing gears and aspecialy first gear decides how you run quarter, my car have just 335 at rears and my best run was 12.335.... anyway congratulations again and see you on suterday:) then i will make post here of our results :)

thanks again mate!

approx wheight for gtst with driver is 1450 kg if drivers wheight is near 100 kilo :)

Edited by guricha
bout 1450 or 1550kgs with me in it. the 12.2 run was with a 2.4 60 foot, i had the launch controll set at 3500rpm which bogged down very hard and took a second before it took off

Robbie Ward who owns RIPS here in NZ who specialises in RB30's said his old Skyline used to spin up 4th gear from start on the burnout. Perhaps you need to do that? Your power levels arent too far off.

Ive been drag racing a few years now and my technique involves a nice big burnout and dropping the clutch at around 6500rpm. I think you will find your 60 foots will improve dramatically. Last time i raced i only had 180kws yet ran 1.6 60 foots. Tyres were the same ones as you have, running 10psi.

Try this and see how you go. Good luck

Cheers

Edited by SirRacer
Mate first i dont wanna belive that and was looking at monitor with wide open eyes :blink: tuning remotly hehe :huh:)

Regarding you drag what tires you were using or do you often make runs on 400 meter because changing gears and aspecialy first gear decides how you run quarter, my car have just 335 at rears and my best run was 12.335.... anyway congratulations again and see you on suterday:) then i will make post here of our results :)

thanks again mate!

approx wheight for gtst with driver is 1450 kg if drivers wheight is near 100 kilo :)

Hehhehee mate all i did in that session was setup your datalogit to log the air fuel ratios from your wide band, reduced the timing on the top end of your map 7deg overall so when your on boost it wont detonate anymore (cos you said it was detonating) incase you accidently floor it between now and satuday arvo lol

ohhh and just made sure everything was running ok throught your mobile phone internet connection so when you go to the track things can go through smoothly

we need a thread on this remote control tuning.

Once i do guricha car in Georgia i will post up some info about it

Remote tuning - this is new :))) Can I apply also ?

Possibly, if you can buy everything needed, i think guricha said it cost him about a grand to get setup with all the stuff he needed to be able to tune his car.

One thing that is needed is a 3g mobile connection with at least 20mb of available bandwidth to use for the time we are tuning, might even need more. SO doing this in Australia might be a bit far off because of the data plans offered to us are about 20 million times higher then whats available over seas it would be just easier to go to your local dyno shop and get a tune there.

Remember guricha comes from a country where there are NO tuners and NO dyno's. This started off as me just trying to help someone out because thats what i do :) if there is a demand for it i would be interested in doing more.

Ohhh also a race track would be good (or a good freeway) , the last thing i would want to see is the speed go from 150 to 0 in 1 second when doing a test run.

I know of a few people who've done idle tuning and what not over the net.

Basically setup wireless internet, and do a remote connection over that (The same way you do Guilt but without the phone net)

Obviously, that setup is only good for doing the idle and the low vacuum points (IE, open throttle up, and tune where the revs are sitting)

Hehhehee mate all i did in that session was setup your datalogit to log the air fuel ratios from your wide band, reduced the timing on the top end of your map 7deg overall so when your on boost it wont detonate anymore (cos you said it was detonating) incase you accidently floor it between now and satuday arvo lol

ohhh and just made sure everything was running ok throught your mobile phone internet connection so when you go to the track things can go through smoothly

Once i do guricha car in Georgia i will post up some info about it

Possibly, if you can buy everything needed, i think guricha said it cost him about a grand to get setup with all the stuff he needed to be able to tune his car.

One thing that is needed is a 3g mobile connection with at least 20mb of available bandwidth to use for the time we are tuning, might even need more. SO doing this in Australia might be a bit far off because of the data plans offered to us are about 20 million times higher then whats available over seas it would be just easier to go to your local dyno shop and get a tune there.

Remember guricha comes from a country where there are NO tuners and NO dyno's. This started off as me just trying to help someone out because thats what i do :thumbsup: if there is a demand for it i would be interested in doing more.

Ohhh also a race track would be good (or a good freeway) , the last thing i would want to see is the speed go from 150 to 0 in 1 second when doing a test run.

I didnot touch the car yet its parked at office and am not going to move it till sutterday:), when ignition is 0 car just simple not going in hight boost than i haveto move ignition on 6 degrees and it was ok detonation around 25 but with 100 octane gasoline, now am using 98 gasoline and detonations ware till 90 sometimes... if we can made and tune car on 16 or 17 psi it will be great and lets see what we can do anyway suterday early morning am going to track so i can runup there till 180 without problem, at the moment car has near 335 HP at rears so i will post all the details and pictures after tuning of pfc:)

do you have a power fc? if you do you need a datalogit

Where I live there are no dynos also ))) I got wideband, got laptop, got wireless CDMA card for wireless internet. What else do I need ?))) Damn, Guricha, u are a mastermind. How come I didn't think of that LOL

it was my idea.. i remote controll PC's all day for work :thumbsup:

Where I live there are no dynos also ))) I got wideband, got laptop, got wireless CDMA card for wireless internet. What else do I need ?))) Damn, Guricha, u are a mastermind. How come I didn't think of that LOL

lol talk about pressure.. I don't know how well its going to go yet lol

We will see tomorrow!

Should be just clicking into 4th :thumbsup:

This wireless tuning your doing is awesome! Keen to hear how it goes

Where I live there are no dynos also ))) I got wideband, got laptop, got wireless CDMA card for wireless internet. What else do I need ?))) Damn, Guricha, u are a mastermind. How come I didn't think of that LOL

Hi Mate :D all this tuning remotly was idea of Anthony:) firs i didnot belive that we can do anything but he made this:) tommorow am going to track and with anthony we will try to tune FC, so than i will post up results and pictures and give you all the details what you need:)

thanks again to Anthony :))) am going to stick your picture on my rides hood:))

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...