Jump to content
SAU Community

Recommended Posts

Hey

Was giving my GTR a bit of a hard time yesterday and now there seems to be a slight issue with the gearbox/clutch engaging

I put the clutch into the floor and when I attempt to change gears it crunches, much like when the clutch isn't engaged

Clutch doesn't slip, not even on high RPM or launching but its starting to crunch 4th gear now even on low RPM levels

I thought it may be the slave or master cylinder leaking pressure and not providing enough clamping pressure on the pressure plate to clutch, causing it to crunch but my dad checked both and it seems neither is leaking

Fluid looks clean with no leaks, according to service records the fluid has been recently changed

Any other thoughts or ideas on what it could be causing the problem

Thanks

Link to comment
https://www.sau.com.au/forums/topic/229469-gtr-gearbox-crunch/
Share on other sites

Okay, well I thought I had it all sorted but it has started happening again

I topped up the fluid as it was a little low, pumped the clutch with the lid off and then tried again and it was fine for a few days, now its started doing it again on the odd occasion

Sometimes its fine then on randomly it will crunch into 4th for no reason

Does anyone know what the fk is up with it??

I'm going to drain the clutch fluid and put new fluid in it next week, then bleed the clutch. Hopefully that does it but some how I don't think its that as the clutch seems to work fine, no slip or anything and grips in every other gear

Thanks

It wont. If it was the clutch it would crunch all gears. No?

Dude its 4th synchro, theyre dynamite for crunching. Redline doesnt help either. Its not as miraculous as most say...

Might as well start looking for a new box lol, thats what I did! Fixed it real good.

It's happened in the past and it's been the clutch, in a previous car I had it was doing exactly the same thing but it was the pressure plate failing due to being weak causing the clutch not to engage 100% therefor making it hard to put it into gear

Also on the forums the cheap clutches that SLIDE was selling, EXEDY clutch plate and OEM pressure plate eventually started to do the same thing

Thanks

I have a GTS4 with a fairly badly crunching 4th.

Why not just try slowing down the speed of gear change?

Double clutch/heel-and-toe gears down.

5th -> Neutral -> 4th

Blipping throttle helps too

Yeah that's what I do to avoid it crunching but I'd rather not do that forever

I found with mine that double clutching did nothing - I noticed however that clutching, bringing the gearstick back slightly and allowing the revs to drop before putting it into 4th makes it smooth again 99% of the time - does not work for downshifts though so I just go straight to third, I'll try some Redline Shockproof Lightweight until ! can get the money together to try and get another GTR/Stagea box!

  • 3 weeks later...

Hey I know this is off the topic a little. My car use to crunch first at the lights and if you where a little miss timed with the clutch on the gaer change it would crunch. I got my clutch changed because all of a sudden I had a large vibration. I had cracked my flywheel. After replacing it I never crunched again. I think I am lucky my flywheel didn't let go when it finally decided to go. The only thing holding it together was the ring gear. So now I am alway carful when my car starts to crunch.

Yeah that's what I do to avoid it crunching but I'd rather not do that forever

my 4th gear synchro's have been bad since the day i bought the car. as most are saying, its a very common problem in the GTR's. ive been "double clutching" the whole time. it helps it to the point where its virtually un-noticable. and if you get it right you can change almost as fast as you normally would. you just need to make sure that you match the revs.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...