Jump to content
SAU Community

Recommended Posts

Yeh, my only Winton time is from last years Dutton, so two laps and i was held up by the F430 Ferrari on my hto lap. He was doing 1:47s so hurt me to the tune of at least 1.8-2.4 seconds as i caught him through the long left hand sweeper and couldnt get past him until the tight right hander onto the back straight away where the timing beacon was :(

http://www.duttonrally.com/results/2007/vi...nt16_Driver.pdf

I think any R32/S13/14/15 platform with 220-240rwkws and tidy suspension and tyres would be in the hunt for that time. Dutton last year has got me thinking that a low 1:35 is possible in my car with some laps.

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Roy I was just checking your Winton time coz I really didn't think a 1:36 from an S13 with a bit of kit and a good run with traffic was really that big of a deal?

It's not really something major, but it's probably the quickest s13 I've seen around Winton. No doubt it would be doable with my old setup with some more track time there, but there's not too many 'quick' s13's kicking around the track days in Vic :)

i agree, 36 is not a special time, it is just rare to see an s13 doing them. you think you know most the track cars kicking round but then you get a surprise. if i had 230+ i would be mighty pissed if i couldnt get a 36 with the amount of laps i have done there.

That silver 180 is Promax Auto's car. The drivers name is Alan and it has around 230rwkw. Hes been there a heap of times now but good effort getting it into the 36's, he really does push it hard though

i agree, 36 is not a special time, it is just rare to see an s13 doing them. you think you know most the track cars kicking round but then you get a surprise. if i had 230+ i would be mighty pissed if i couldnt get a 36 with the amount of laps i have done there.

I have done more laps there in the Lotus then i have my own car :(

  • 2 weeks later...
Belsil80, the 180sx is my brother and the evo6 was me, however i blow up my engine at session 2.....:laugh:

oh...and... phunky_monkey, my brother just told me the engine he is using now is the one he bought it off you sometime last year...... small world...and all he did is a GT2871R, power fc, 550cc injectors and a boost controller. no internal mods to the engine yet. He is very happy with the condition of the engine is in and he can't wait to go to a track day with you when your car is done... cheers

Very small work indeed! I'm also the guy who came ot look at the tyres if you remember...

Glad to hear the engine is still going strong. I probably should have kept it, then I'd be racing right now! That was a great engine, never gave me any grief. Hopefully we can go for a run out there together soon :)

Dane

oh...and... phunky_monkey, my brother just told me the engine he is using now is the one he bought it off you sometime last year...... small world...and all he did is a GT2871R, power fc, 550cc injectors and a boost controller. no internal mods to the engine yet. He is very happy with the condition of the engine is in and he can't wait to go to a track day with you when your car is done... cheers

We were running 1.6 bar and 240 rwkw for quite a few years with that engine... built Nissan Tough!

Going to Winton just wana know a decent lap time around there im using my GTS4 has got a fair few mods just wana know an idea of what you guys run.

Cheers David

Went to Winton Saturday two weeks ago

Damp track and traffic

Bog standard Chrysler 300C as it left the showroom 18 month and 20,000ks ago

most laps 1:44.0 - 1:44.4 one clear one at 1:43.4

OK for 1940 kgs of 4 door limo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
×
×
  • Create New...