Jump to content
SAU Community

Recommended Posts

Some of you know that I'm married to a rather understanding lady that shares my passion for things with wheels. She knows of my late night meetings with "the other woman", the one with the big, red R on her hind quarters. With the death of my favorite money tree(I blame the drought), the 32 has slowed in it's overhaul plans. So, I've been flirting with an old flame...

Carbon Fibre. Black gold. The über strength to weight material. Oh, how I love thee!

My car has some select parts made of my favorite composite, but I want more. MORE! This material fascinates me so much, I'm ready to tale the next step. So, I'm putting it out to you all: I want to learn how to make Carbon Fibre. I don't want to read web pages, I want hands on with someone who's done it before. Who knows someone? A course I might take? Experience counts, people!

I'm listening! PM's accepted as well...

Link to comment
https://www.sau.com.au/forums/topic/229844-i-confess-im-in-a-love-affair/
Share on other sites

do a google search for "DIY vacuum forming".

I made my own vacuum former using parts from a refrigerator compressor I had lying around and make some small parts with it... also helps with getting air out of resin mixtures and thermoforming plastics.

do a google search for "DIY vacuum forming".

I made my own vacuum former using parts from a refrigerator compressor I had lying around and make some small parts with it... also helps with getting air out of resin mixtures and thermoforming plastics.

Now we're talking! When F. M. kicks in a suggestion, I'll be listening! Ta!

If anyone here was to "turn to the darkside" it wouldnt be Jayce, Ive never met a bigger Skyline tragic :)

To me, this is not just music to my ears, but a huge compliment! Nissan Skyline for life! Need proof? Ask me about an ages old tattoo I have...

Welcome back, Gus!

And the CF thing will be further researched in days to come; stay tuned!

  • 4 months later...
PICS!!!!!

And Petey has already told me I'm not allowed to have GTR tattooed anywhere on my body :)

I guess that means I'm off his list then!!

I'll see if I can organise a decent pic'...

Hehe he may like it I just don't think he wants to see it on his wife!! :)

You know he wants it, go on!

Seriously, tho'; the GT-R was always a long term dream of mine, and will stay with me until...well, it doesn't bear thinking about! So the tattoo was a respect thing for me...and will also stay with me to the grave!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...