Jump to content
SAU Community

Recommended Posts

Hey guys, I'm Nigel, a member from Adelaide.

I'm asking for a large favour for monday (04/08/08)

Myself and a mate land at Brissy airport at 9am, and need to get to Morayfield to pick up my new beast from another member, ready to drive home to Adelaide. I would greatly appreciate a lift from a generous member if it was in any way possible. The trip will of course be rewarded with petrol money. The trip is 45kms approx, and would prefer a faster and more economical alternative to a $100 taxi for a <45 minute trip.

I also need to make my way to Queensland transport on piper street at Morayfield also, but thats only a $15 taxi from the car's location, so i have that covered.

Hoping that a member finds it in thier heart to give 2 guys a lift on thier way to work or whatever.

Any help would be greatly appreciated.

Nigel.

Link to comment
https://www.sau.com.au/forums/topic/230477-urgent-help-needed-for-monday/
Share on other sites

Hey guys, I'm Nigel, a member from Adelaide.

I'm asking for a large favour for monday (04/08/08)

Myself and a mate land at Brissy airport at 9am, and need to get to Morayfield to pick up my new beast from another member, ready to drive home to Adelaide. I would greatly appreciate a lift from a generous member if it was in any way possible. The trip will of course be rewarded with petrol money. The trip is 45kms approx, and would prefer a faster and more economical alternative to a $100 taxi for a <45 minute trip.

I also need to make my way to Queensland transport on piper street at Morayfield also, but thats only a $15 taxi from the car's location, so i have that covered.

Hoping that a member finds it in thier heart to give 2 guys a lift on thier way to work or whatever.

Any help would be greatly appreciated.

Nigel.

cant help with the lift but i'd suggest the train

yeah i was gonna suggest the train whist reading too.. would be alot more convenient.. take train to neatest station and bus/taxi it to his house then drive to qld transport.. alternatively if your just looking to trade in the plates just drive to adelaide and trade them in there.. its do-able

i would have been willing to give you a lift but have to work

good luck with the new car :)

i figured most people would be working. Time is an issue, hence i dont wanna wait for the train. Already checked the time tables, and i'd be losing over an hour of precious travel time. Car is unregoed, so cant drive it till i get permits from qld transport, hence all the taxi's.

Hmm I'd be happy to run you around for the morning but not sure I can get the time off work ><

Surely there is someone on here who works casual work or something?

We don't have any luggage by the way, nor do we smell.... (contrary to rumours)

Easy way to make $50 for 45 minutes of someones time?

We need to hit the road to home by about 11am, so thats why i'd prefer no taxi queues or trains.

Cheers guys

Heading down the coast that day for work so can't help you out. No offence but you probably should have picked a more appropriate username before you posted this request lol :) Good luck and hope you find someone to take u there!

Heading down the coast that day for work so can't help you out. No offence but you probably should have picked a more appropriate username before you posted this request lol :) Good luck and hope you find someone to take u there!

haha yeh, i realised that this morning. "BIT SUS" are my rego plates here in SA, they used to be on my track spec forester. :O

PM Sent..........

Thanks for your help guys! A very generous member has come forward to the rescue!

i'll post up some photos of the new whip when she's home safe after a 2100km journey.

Nigel.

did i read correctly?

track spec forester?

i didn't realise there were track spec station wagons....

unless the race includes picking up shopping, kids from rugby etc. sorta like what the v8 should do to make it more realistic....

did i read correctly?

track spec forester?

i didn't realise there were track spec station wagons....

unless the race includes picking up shopping, kids from rugby etc. sorta like what the v8 should do to make it more realistic....

"track spec" =

110KW NA

1290kg

racing logic coilovers.

full whiteline range

18x8's

5 degrees castor

-2.5 camber

handled like a go kart. really miss it ;) was perfect for hills runs would outrun bikes

Haha nah it's true, any decent car will out-corner a decent bike. Look at the difference in how much rubber is on the road - two contact patches the size of a 20c piece versus four big 235mmx20mm or whatever patches. A well-ridden bike can be damn hard to catch but a well driven car should be able to hold more corner speed, the only saving grace for the bike is that it can use wider lines but it takes a LOT of commitment to ride that hard.

It's fun trying though :blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...