Jump to content
SAU Community

Recommended Posts

Opinions on which tyre you think would be the best bang for buck for an R32 GTR as far as street/track performance. Looking for the best option to put on my GTR for all weather conditions, 95% street use, 5% track use.

If money is no object, Michelin Pilot Sport PS2. They're probably the best regular roadgoing tyre on the market.

If you can't stretch that far, but you've still got plenty of coin its hard to beat the Bridgestone Potenza RE-01R.

On a budget, Falken Azenis RT615.

All these tyres have great dry and wet weather grip, and don't require that much heat to start working. None of these tyres will last particularly long (although the Pilot Sports will last the longest), so if you're daily driving it then there's other considerations.

Bridgestone Adrenalin RE-001s are a good bang for buck budget street tyre, but in terms of grip and heat capacity they aren't in the same league as the above. Same with the Toyo T1Rs, which are also highly recommended. However, they will last a lot longer than any tyres mentioned earlier.

Edited by scathing

As usual, great information from a very knowledgeable crew. :starwars: I think it will boil down to the RE001s and the Falken Azenis. Can any of you young Jedi's recommend a good dealership in Melbourne for the afore-mentioned tyres (when i say "good" i mean someone who is reasonably priced)? Or can you import these?? Cheers

Buy a track set.. proper semi slicks..

and a cheaper street set..

Semi's can be scary as anything int he wet.. and very rrely will you get up to proper oprating temps on the street.. not worth it

its the cheapest way to go

Edited by GTS4WD
If money is no object, Michelin Pilot Sport PS2. They're probably the best regular roadgoing tyre on the market.

If you can't stretch that far, but you've still got plenty of coin its hard to beat the Bridgestone Potenza RE-01R.

On a budget, Falken Azenis RT615.

All these tyres have great dry and wet weather grip, and don't require that much heat to start working. None of these tyres will last particularly long (although the Pilot Sports will last the longest), so if you're daily driving it then there's other considerations.

Bridgestone Adrenalin RE-001s are a good bang for buck budget street tyre, but in terms of grip and heat capacity they aren't in the same league as the above. Same with the Toyo T1Rs, which are also highly recommended. However, they will last a lot longer than any tyres mentioned earlier.

RE-01R's are no longer being made and cant get them into Australia too easily, otherwise i would have recommended them.

tbh when i first read this thread for some reason i was thinking he was actually after a high performance street tyre, not a street/track tyre so ill take that back, as u mentioned they arnt really suited to heaps of track work.

in an identical thread on ns about a street/track tyre i recommended these 3:

Bridgestone Potenza RE-01R

Yokohama ADVAN Neova AD07

Dunlop Direzza Sport Z1

i still stick to it, but unfortunately they are not easy to get into the country, although recently this bloke was able to get his hands on the direzzas for a bloody good price through tire rack http://hardtuned.net/forums/index.php?s=&a...t&p=4403390

as i mentioned, the RE-01R's arnt being made any more, and the bridgestone dealers dont seem to be able to bring them in. ur only real option with those 2 are getting an import broker to send some over from Japan.

RE-01R's are no longer being made and cant get them into Australia too easily, otherwise i would have recommended them.

tbh when i first read this thread for some reason i was thinking he was actually after a high performance street tyre, not a street/track tyre so ill take that back, as u mentioned they arnt really suited to heaps of track work.

in an identical thread on ns about a street/track tyre i recommended these 3:

Bridgestone Potenza RE-01R

Yokohama ADVAN Neova AD07

Dunlop Direzza Sport Z1

i still stick to it, but unfortunately they are not easy to get into the country, although recently this bloke was able to get his hands on the direzzas for a bloody good price through tire rack http://hardtuned.net/forums/index.php?s=&a...t&p=4403390

as i mentioned, the RE-01R's arnt being made any more, and the bridgestone dealers dont seem to be able to bring them in. ur only real option with those 2 are getting an import broker to send some over from Japan.

Potenza RE01-R are still being made (http://www.bridgestone.co.jp/tire/potenza_re01r/) but they were never available locally unless you went to the specialized Bridgestone Motorsport dealers.

I was quote $350 for 235/45/R17 for RE01-R, from the Bridgestone Motorsport dealer in perth. i ended up going with the RE0001 as they were alot cheaper (only $250each for same size); i found them great and extremely grippy, even after 5lap session they were still holding there grip (350hp r33)

Also be aware that if you get atop of the line tyre they will a soft compound, so if you do alot of street driving you will wear the tyre quicker than a normal tyre

Edited by [Michael]

Go to tirerack.com in the US. They do RE01Rs and they are about $250 per corner plus freight @ $200 for the lot. They are most helpful and will happily ship. Just seen Ronin 09's post. Best confess he put me onto them. What he says.

Edited by LotusGTR

Potenza RE01-R are still being made (http://www.bridgestone.co.jp/tire/potenza_re01r/) but they were never available locally unless you went to the specialized Bridgestone Motorsport dealers.

I was quote $350 for 235/45/R17 for RE01-R, from the Bridgestone Motorsport dealer in perth. i ended up going with the RE0001 as they were alot cheaper (only $250each for same size); i found them great and extremely grippy, even after 5lap session they were still holding there grip (350hp r33)

Also be aware that if you get atop of the line tyre they will a soft compound, so if you do alot of street driving you will wear the tyre quicker than a normal tyre

ahk, it was bridgestone that told me they were no longer made, just goes to show u how little they know about their own performance products.

Go to tirerack.com in the US. They do RE01Rs and they are about $250 per corner plus freight @ $200 for the lot. They are most helpful and will happily ship. Just seen Ronin 09's post. Best confess he put me onto them. What he says.

yeh apparently the bloke i mentioned earlier got the direzza's for around $250 delivered, from what ive read they are an extremely similar tyre, in fact some places rate them higher. direzza's would be my choice simply based on price.

ahk, it was bridgestone that told me they were no longer made, just goes to show u how little they know about their own performance products.

Last time I checked they are on the Bridgestone Aust website. I rang one dealer and they told me they were unavailable despite being on the web and the next I rang said yes they can get them but at about $495 per corner for 255/40/17.......Go figure.

I know I say this all the time but :P... For a street/track tyre for the right price you cant go past the Federal 595RS-R - Street legal semi slick with 140 treadwear rating (which is lower than Falken and Bridgestone alternatives)... I use them as a daily driven tyre and can easily get up to 20 - 25,000kms from a set looking after them.

post-17958-1218088197_thumb.jpg

Last time I checked they are on the Bridgestone Aust website. I rang one dealer and they told me they were unavailable despite being on the web and the next I rang said yes they can get them but at about $495 per corner for 255/40/17.......Go figure.

haha basically unless ur looking to put turanzas on ur commie, they are useless.

I'll give you one from left field to get you thinking.

For so little track work i wouldn't even factor that into the equation.

You are predominantly street driving so you want a tyre that performs in the wet, is quiet, and will give you a reasonable life.

forget about the softer street tyres like adrenaline's, re001's, 595rs's if your car is your daily commuter. You'll spend 1200+ for a set of tyres and they'll be shagged after a year and you'll be buying new ones. Shit, if you spent 1200 on a set of tyres that lasted 3 years you could easily afford a dedicated set of track tyres and wheels with the savings.....

I wont recommend a specific tyre as i run 595rs front and rt215 rear which i don't think are appropriate for either a commuter or a track car, they are too compromised for either. too soft for longevity and not soft enough for track. ok for an occasional weekender though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...