Jump to content
SAU Community

Recommended Posts

ok i am selling my power fc because i need to go to map sensor so i am getting autronic.

So up for grabs is my power fc hand controller, z32 afm and plug to suit. These will be ready on the 10th of september when i pull it out of my car so this is just a heads up if your after it gives ya two weeks to get the cash.

powerfc is a year old everything is in perfect working order.

I'm after $1500 or closest offer to that for it all.

P.M here any questions

Link to comment
https://www.sau.com.au/forums/topic/233888-r34-gtt-powerfc-z32-afm-and-plug/
Share on other sites

which brand is the Z32 AFM and how old ?

I can maybe go to $1100 for the lot (I can get the pfc for $1220 brand new and afm for $270 so your asking price is a bit too high for me)

$1220 is a great price, i'de be getting that one.......

might have a buyer for the afm and plug so if someone is interested in the powerfc and hand controller shoot me an offer.

It's a serious offer not being a smartarse. Since there is no apparent interest in these items and he seems keen to sell it and I do require these items (but NOT at any price) I'm making an offer that I believe is realistic. If someone else offers more I may reconsider my offer but until then, take it or leave it.

Haha $2175... tell him he's dreamin :P

$1400 is a good price mate. I paid $300 for my Z32 with plug and $1000 for my emanage ultimate (only a piggy back) cos there were no PFC's available at the time... PFC's for GTT are rare as duck's balls these days so someone is bound to pay it eventually.

Free Bump.

Ok i just found a autronic sm4 for the price i want so i need some cash...... sooo a further price drop to 1300 now thats extremely cheap these days for pfc hand controller z32afm and plug.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...