Jump to content
SAU Community

Recommended Posts

How to go from the Penthouse to the cellar in one easy leasson. Power cruise at qr today Just doing what the natives do. Cruising, racing and having fun. During the off street racing segment I stopped on the back straight. Gave it 5 kay on the tacho and slipped the clutch to warm up the mickey T's in preperation for a race. What happenned next i wouldnt wish on anybody.

An incredibly loud explosion shook the shit out of the car, I clutched it and stopped it as quickly as I could and looked back to see a pile of debris scattered all over the track. The clutch housing literally exploded, the bellhousing was blown to smithereens, the slave was sent to god and probably still hasnt landed, shrapnell took out the dump which, fortunately saved the chassis rail. Bits of the back of the engine block were blown off. The starter motor copped it.

The majority of the blast fortunately went downwards in to the bitumen, fortunate for me because if it went the opposite way i shudder to think what may have happenned.

The clutch was a Jim Berry full monty, Pupportedly capable of holding some major horsepower. Wether I am just the unlucky one or not I dont know but I will not use another clutch without a burstproof housing and a kevlar blanket.

A very sobering experience.

Edited by FineLine
  • Replies 84
  • Created
  • Last Reply

Top Posters In This Topic

well I guess you've joined ben's club, glad to hear you weren't injured because that sort of accident could cost you your legs :thumbsup:

most likely it was the flywheel that went not the clutch - what flywheel was it?

I originally had a standard flywheel in the race car but we found hairline cracks - I changed it for a billet one for exactly this reason

well I guess you've joined ben's club, glad to hear you weren't injured because that sort of accident could cost you your legs :)

most likely it was the flywheel that went not the clutch - what flywheel was it?

I originally had a standard flywheel in the race car but we found hairline cracks - I changed it for a billet one for exactly this reason

The os giken flywheel is still intact and bolted to the back of the engine. Its was the clutch housing that let go.

Edited by FineLine

Shit! I spoke to Jim about this when ordering my single plate clutch. He told me that the standard flywheel would be fine but i think ill change to a steel item next time i pull the gearbox.

Looking forward to pics of the clutch housing.

Shit! I spoke to Jim about this when ordering my single plate clutch. He told me that the standard flywheel would be fine but i think ill change to a steel item next time i pull the gearbox.

Looking forward to pics of the clutch housing.

Think more about your clutch cover than your flywheel Shawn. Having done some preliminary homework already it would appear this is not an isolated incident.

I have already sourced a similar hp rated clutch with an antiburst cover for a lot less bucks than the berry. He can shove his full monty where the sun dont shine.

shite, sorry to hear. i wont get into it here because ive said it so many times, but these types of failures are the reasons i like to stick to decent stuff like ORC etc....

Think more about your clutch cover than your flywheel Shawn. Having done some preliminary homework already it would appear this is not an isolated incident.

I have already sourced a similar hp rated clutch with an antiburst cover for a lot less bucks than the berry. He can shove his full monty where the sun dont shine.

It would be interesting to hear what Jim says about this incident.

I actually bought a Nismo clutch and he modified it to suit my application, so hopefully i dont suffer the same fate.

Im really sorry to hear about this though. Ive sufferred engine failures due to things that werent my fault and it sucks.

It would be interesting to hear what Jim says about this incident.

I actually bought a Nismo clutch and he modified it to suit my application, so hopefully i dont suffer the same fate.

Im really sorry to hear about this though. Ive sufferred engine failures due to things that werent my fault and it sucks.

Sorry to go off topic but you needed a nismo clutch modified? WHY MAN? They are among the best clutches, dont rattle, atleas mine didnt and feel prety much stock...

Sorry to go off topic but you needed a nismo clutch modified? WHY MAN? They are among the best clutches, dont rattle, atleas mine didnt and feel prety much stock...

Well, maybe i shouldnt have said 'modified'. I bought a single plate nismo clutch that had worn out, sent it to Jim, and it came back all new and shiney. He increased the clamping force i know that, but as for the rest of it, im not sure. It certainly doesnt feel like standard pedal pressure though!

fk mate. i'm sorry to hear that. clutch or flywheel explosions are a very scary thing. one happend recently to a friend of mine and he was very lucky. some pieces of shrapnel pierced the floor and through the car roof. all he got was a cut thumb! (this one was an alfa race car and not using a JB clutch).

I can name a few such explosions now in skylines and all the ones I know of were running jim berry clutches. I don't know if it's coincidence or not but it is a worry. benm can tell you his story which for all intents and purposes made his car a financial write off. There was another also in sydney a few months prior.

Well I spoke (and spoke, and spoke, and spoke, and spoke, and spoke, and spoke, and spoke, and spoke) to Mr. Berry this afternoon and he expressed interest in pursuing the matter via his insurance company. Something to do with A dodgy batch of covers or such.

I've been jumped through hoops before so I dont hold much hope but I will pursue it regardless.

Will keep you posted.

god i didn;t think it was going ot be that bad from the description but then again pictures do paint a better image of what you were describing.

the flywheels looks intact wonder what sheered off

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...