Jump to content
SAU Community

Recommended Posts

How to go from the Penthouse to the cellar in one easy leasson. Power cruise at qr today Just doing what the natives do. Cruising, racing and having fun. During the off street racing segment I stopped on the back straight. Gave it 5 kay on the tacho and slipped the clutch to warm up the mickey T's in preperation for a race. What happenned next i wouldnt wish on anybody.

An incredibly loud explosion shook the shit out of the car, I clutched it and stopped it as quickly as I could and looked back to see a pile of debris scattered all over the track. The clutch housing literally exploded, the bellhousing was blown to smithereens, the slave was sent to god and probably still hasnt landed, shrapnell took out the dump which, fortunately saved the chassis rail. Bits of the back of the engine block were blown off. The starter motor copped it.

The majority of the blast fortunately went downwards in to the bitumen, fortunate for me because if it went the opposite way i shudder to think what may have happenned.

The clutch was a Jim Berry full monty, Pupportedly capable of holding some major horsepower. Wether I am just the unlucky one or not I dont know but I will not use another clutch without a burstproof housing and a kevlar blanket.

A very sobering experience.

Edited by FineLine
  • Replies 84
  • Created
  • Last Reply

Top Posters In This Topic

well I guess you've joined ben's club, glad to hear you weren't injured because that sort of accident could cost you your legs :thumbsup:

most likely it was the flywheel that went not the clutch - what flywheel was it?

I originally had a standard flywheel in the race car but we found hairline cracks - I changed it for a billet one for exactly this reason

well I guess you've joined ben's club, glad to hear you weren't injured because that sort of accident could cost you your legs :)

most likely it was the flywheel that went not the clutch - what flywheel was it?

I originally had a standard flywheel in the race car but we found hairline cracks - I changed it for a billet one for exactly this reason

The os giken flywheel is still intact and bolted to the back of the engine. Its was the clutch housing that let go.

Edited by FineLine

Shit! I spoke to Jim about this when ordering my single plate clutch. He told me that the standard flywheel would be fine but i think ill change to a steel item next time i pull the gearbox.

Looking forward to pics of the clutch housing.

Shit! I spoke to Jim about this when ordering my single plate clutch. He told me that the standard flywheel would be fine but i think ill change to a steel item next time i pull the gearbox.

Looking forward to pics of the clutch housing.

Think more about your clutch cover than your flywheel Shawn. Having done some preliminary homework already it would appear this is not an isolated incident.

I have already sourced a similar hp rated clutch with an antiburst cover for a lot less bucks than the berry. He can shove his full monty where the sun dont shine.

shite, sorry to hear. i wont get into it here because ive said it so many times, but these types of failures are the reasons i like to stick to decent stuff like ORC etc....

Think more about your clutch cover than your flywheel Shawn. Having done some preliminary homework already it would appear this is not an isolated incident.

I have already sourced a similar hp rated clutch with an antiburst cover for a lot less bucks than the berry. He can shove his full monty where the sun dont shine.

It would be interesting to hear what Jim says about this incident.

I actually bought a Nismo clutch and he modified it to suit my application, so hopefully i dont suffer the same fate.

Im really sorry to hear about this though. Ive sufferred engine failures due to things that werent my fault and it sucks.

It would be interesting to hear what Jim says about this incident.

I actually bought a Nismo clutch and he modified it to suit my application, so hopefully i dont suffer the same fate.

Im really sorry to hear about this though. Ive sufferred engine failures due to things that werent my fault and it sucks.

Sorry to go off topic but you needed a nismo clutch modified? WHY MAN? They are among the best clutches, dont rattle, atleas mine didnt and feel prety much stock...

Sorry to go off topic but you needed a nismo clutch modified? WHY MAN? They are among the best clutches, dont rattle, atleas mine didnt and feel prety much stock...

Well, maybe i shouldnt have said 'modified'. I bought a single plate nismo clutch that had worn out, sent it to Jim, and it came back all new and shiney. He increased the clamping force i know that, but as for the rest of it, im not sure. It certainly doesnt feel like standard pedal pressure though!

fk mate. i'm sorry to hear that. clutch or flywheel explosions are a very scary thing. one happend recently to a friend of mine and he was very lucky. some pieces of shrapnel pierced the floor and through the car roof. all he got was a cut thumb! (this one was an alfa race car and not using a JB clutch).

I can name a few such explosions now in skylines and all the ones I know of were running jim berry clutches. I don't know if it's coincidence or not but it is a worry. benm can tell you his story which for all intents and purposes made his car a financial write off. There was another also in sydney a few months prior.

Well I spoke (and spoke, and spoke, and spoke, and spoke, and spoke, and spoke, and spoke, and spoke) to Mr. Berry this afternoon and he expressed interest in pursuing the matter via his insurance company. Something to do with A dodgy batch of covers or such.

I've been jumped through hoops before so I dont hold much hope but I will pursue it regardless.

Will keep you posted.

god i didn;t think it was going ot be that bad from the description but then again pictures do paint a better image of what you were describing.

the flywheels looks intact wonder what sheered off

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...