Jump to content
SAU Community

Recommended Posts

its enough to get any turbo owners nose out of joint! :):D

Magnetic fuel saver, turbo zet or ebay power chip?

Excluding a 2.5L capacity increase or -600Kg , I don't think any turbo owner would be too concerned

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

havent been able to do the dyno run yet.......... :blush: have had to work endlessly atm and i need to change the oil aswell cause she has decided to chuck the shits on the pennzoil we put in just before Autosalon.....the oil is black as and that was after 4 weeks! so im putting in my Nulon Fully Synthetic again aswell as putting in a flush to get anycrap out.

Not necessarily a bad thing, as long as the oils still thick and theres good pressure, different oils have different detergents which can blacken the oil. I'm allways pedantic about my oil though and change on colour or 5000kms what ever comes first, including an oil flush.

Magnetic fuel saver, turbo zet or ebay power chip?

Excluding a 2.5L capacity increase or -600Kg , I don't think any turbo owner would be too concerned

pfffttt, More Nitrous.......?

I'm still wondering how your missing power has come back so suddenly from a change in knock sensors when you run a power FC...

Also, you seem pretty caught up on playing the numbers game...

A mates car went from making 195RWKW to making 160oddRWKW, yet, it still ran the exact same 1/4 mile times... Maybe when he lost power, the laws of physics changed also?

  • 2 weeks later...
  • 2 weeks later...
well it wasnt actually..............thank you very much. dont ever assume anything with my car.

and just on a good note.........i am now proudly sponsored by MARTINI RACING.

So a sensor that provides feed back to a system, which does NOTHING with this feed back to alter ANYTHING, not even pull timing or change fuelling... Made a difference on your car?

Wow... I really want to know how it did that...

Unsure if you know, but having a knock sensor, having a dead knock sensor, and having no knock sensor, on a car with a powerFC will make it run EXACTLY the same... The only thing you'll notice, is the CEL flashing if you actually get knock, (Or if it's cactus it'll flash without there being any knock, and without the sensor, it won't flash at all)

But glad to see you picked up 50 bajillion killer wasps at the rear wheels...

So, when are we going to actually see this thing make a pass down the quarter to back up these over inflated dyno figures? Or, are you too scared to run it down the 1/4 as it'd prove you don't have all those killer wasps, just like you won't post a dyno sheet of how it's running now as you know the knock sensor did sweet f**k all, and if your mechanic told you it made a difference, you should quit going to him.

If it's you saying "it made a difference" get over the placebo effect.

i'm going to keep my opinions out of this, however a friendly reminder to everyone posting to keep comments civil.

if cara has done things with positive experiences then there really isn't much problem is there.

play nice :)

So a sensor that provides feed back to a system, which does NOTHING with this feed back to alter ANYTHING, not even pull timing or change fuelling... Made a difference on your car?

Wow... I really want to know how it did that...

Unsure if you know, but having a knock sensor, having a dead knock sensor, and having no knock sensor, on a car with a powerFC will make it run EXACTLY the same... The only thing you'll notice, is the CEL flashing if you actually get knock, (Or if it's cactus it'll flash without there being any knock, and without the sensor, it won't flash at all)

But glad to see you picked up 50 bajillion killer wasps at the rear wheels...

So, when are we going to actually see this thing make a pass down the quarter to back up these over inflated dyno figures? Or, are you too scared to run it down the 1/4 as it'd prove you don't have all those killer wasps, just like you won't post a dyno sheet of how it's running now as you know the knock sensor did sweet f**k all, and if your mechanic told you it made a difference, you should quit going to him.

If it's you saying "it made a difference" get over the placebo effect.

How manny killer wasps does your 33 make before melting into the tarmac, champ?

I wouldn't worry about the oil changing colour too much at all. Even synthetic will turn black - especially if the cleaning agents in most street engine oils are doing their thing.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...